Effect of silane treatment parameters on the silane layer formation and bonding to thermoplastic urethane

被引：35

作者：

Hoikkanen, Maija ^{[1
]}

Honkanen, Mari ^{[2
]}

Vippola, Minnamari ^{[2
]}

Lepisto, Toivo ^{[2
]}

Vuorinen, Jyrki ^{[1
]}

机构：

[1] Tampere Univ Technol, Dept Mat Sci, Lab Plast & Elastomer Technol, FIN-33101 Tampere, Finland

[2] Tampere Univ Technol, Dept Mat Sci, Mat Characterizat Lab, FIN-33101 Tampere, Finland

来源：

PROGRESS IN ORGANIC COATINGS | 2011年 / 72卷 / 04期

关键词：

Aminosilane; Stainless steel; Metal-plastic hybrid; Injection molding; DIFFERENT MICROSTRUCTURAL REGIONS; ADHESION; FILMS; ORGANOSILANES; DEPOSITION; MORPHOLOGY; ADSORPTION; SURFACES; STEEL; BTSE;

D O I：

10.1016/j.porgcoat.2011.08.002

中图分类号：

O69 [应用化学];

学科分类号：

081704 ;

摘要：

Enhancing adhesion is of primary importance in preparation of insert injection molded plastic-metal hybrids. Here, the combination of coupling agent application parameters and steel oxide microstructure effects on the adhesion in thermoplastic urethane-stainless steel hybrids was studied. The stainless steel oxide structure was first modified by electrolytical polishing and subsequent oxidation treatment, then the steel was coated with N-(beta-aminoethyl)-gamma-aminopropyltrimethoxysilane (gamma-AEAPS) prior to overmolding with thermoplastic urethane. The properties of formed silane coatings and ultimately the thermoplastic urethane-stainless steel hybrids were determined by several microscopical methods, infrared spectroscopy and mechanical testing. The bond strength of hybrids depended on the silane layer thickness. Also the stainless steel surface oxide structure had a remarkable influence on the coating formation and the resulting hybrid bond strength. (C) 2011 Elsevier B.V. All rights reserved.

引用

页码：716 / 723

页数：8

共 27 条

[1] AI-Sheyyab A., 2007, P 65 ANN TECHN C SOC, P1000
[2] [Anonymous], 2000, HDB ADHESIVES SEALAN
[3] Biron M., 2007, Thermoplastics and Thermoplastic Composites, P715, DOI [10.1016/8978-185617478-7.50008-8, DOI 10.1016/B978-185617478-7.50008-8]
[4] Self-assembled monolayer of 3-aminopropyltrimethoxysilane for improved adhesion between aluminum alloy substrate and polyurethane coating
Chen, Hui
Wang, Jinhai
Huo, Qun
[J]. THIN SOLID FILMS, 2007, 515 (18) : 7181 - 7189
[5] Silanization of stainless steel surfaces: Influence of application parameters
Chovelon, JM
Aarch, LE
Charbonnier, M
Romand, M
[J]. JOURNAL OF ADHESION, 1995, 50 (01) : 43 - 58
[6] Silane solution stability and film morphology of water-based bis-1,2-(triethoxysilyl)ethane for thin-film deposition on aluminium
De Graeve, I.
Tourwe, E.
Biesemans, M.
Willem, R.
Terryn, H.
[J]. PROGRESS IN ORGANIC COATINGS, 2008, 63 (01) : 38 - 42
[7] Silane coating of metal substrates: Complementary use of electrochemical, optical and thermal analysis for the evaluation of film properties
De Graeve, I.
Vereecken, J.
Franquet, A.
Van Schaftinghen, T.
Terryn, H.
[J]. PROGRESS IN ORGANIC COATINGS, 2007, 59 (03) : 224 - 229
[8] Electrochemical and surface analytical study of vinyl-triethoxy silane films on iron after exposure to air
Flis, J
Kanoza, M
[J]. ELECTROCHIMICA ACTA, 2006, 51 (11) : 2338 - 2345
[9] Determination of the thickness of thin silane films on aluminium surfaces by means of spectroscopic ellipsometry
Franquet, A
De Laet, J
Schram, T
Terryn, H
Subramanian, V
van Ooij, WJ
Vereecken, J
[J]. THIN SOLID FILMS, 2001, 384 (01) : 37 - 45
[10] Effect of deposition conditions for gamma-aminopropyltriethoxy silane on adhesion between copper and epoxy resins
Gu, XH
Xue, G
Jiang, BC
[J]. APPLIED SURFACE SCIENCE, 1997, 115 (01) : 66 - 73

← 1 2 3 →