M23C6 carbides and Cr2N nitrides in aged duplex stainless steel: A SEM, TEM and FIB tomography investigation

被引：73

作者：

Maetz, J. -Y. ^{[1
]}

Douillard, T. ^{[1
]}

Cazottes, S. ^{[1
]}

Verdu, C. ^{[1
]}

Kleber, X. ^{[1
]}

机构：

[1] Univ Lyon, INSA Lyon, MATEIS, CNRS,UMR 5510, F-69621 Villeurbanne, France

来源：

MICRON | 2016年 / 84卷

关键词：

2101 lean duplex stainless steel; M23C6; carbides; Cr2N nitrides; Precipitation; FIB nanotomography; TEM; HIGH-NITROGEN; PRECIPITATION; AUSTENITE; MICROSTRUCTURE; IMAGE; DECOMPOSITION; MECHANISM; BOUNDARY; BEHAVIOR; FERRITE;

D O I：

10.1016/j.micron.2016.01.007

中图分类号：

TH742 [显微镜];

学科分类号：

摘要：

The precipitation evolution during ageing of a 2101 lean duplex stainless steel was investigated, revealing that the precipitate type and morphology depends on the nature of the grain boundary. Triangular M23C6 carbides precipitate only at gamma/delta interfaces and rod-like Cr2N nitrides precipitate at both gamma/delta and delta/delta interfaces. After 15 min of ageing, the M23C6 size no longer evolves, whereas that of the Cr2N continues to evolve. For Cr2N, the morphology is maintained at gamma/delta interfaces, whereas percolation occurs to form a continuous layer at delta/delta interfaces. By combining 2D and 3D characterisation at the nanoscale using transmission electron microscopy (TEM) and focused ion beam (FIB) tomography, a complete description of the precipitation evolution was obtained, including the composition, crystallographic structure, orientation relationship with the matrix phases, location, morphology, size and volume fraction. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：43 / 53

页数：11

共 48 条

[1]

ALFONSSON E., 2010, DUPLEX STAINLESS STE, P787

[2] Chemically Induced Phase Transformation in Austenite by Focused Ion Beam [J].

Basa, Adina ;

Thaulow, Christian ;

Barnoush, Afrooz .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (03) :1189-1198

[3] SHAPE AND MECHANISM OF FORMATION OF M23C6 CARBIDE IN AUSTENITE [J].

BECKITT, FR ;

CLARK, BR .

ACTA METALLURGICA, 1967, 15 (01) :113-&

[4]

Boulos V., 2012, 18 INT EUR C PAR DIS

[5] Multiscale 3D analysis of creep cavities in AISI type 316 stainless steel [J].

Burnett, T. L. ;

Geurts, R. ;

Jazaeri, H. ;

Northover, S. M. ;

McDonald, S. A. ;

Haigh, S. J. ;

Bouchard, P. J. ;

Withers, P. J. .

MATERIALS SCIENCE AND TECHNOLOGY, 2015, 31 (05) :522-534

[6] Advances in 3D focused ion beam tomography [J].

Cantoni, Marco ;

Holzer, Lorenz .

MRS BULLETIN, 2014, 39 (04) :354-360

[7] From the physics of secondary electron emission to image contrasts in scanning electron microscopy [J].

Cazaux, Jacques .

JOURNAL OF ELECTRON MICROSCOPY, 2012, 61 (05) :261-284

[8] Material contrast in SEM: Fermi energy and work function effects [J].

Cazaux, Jacques .

ULTRAMICROSCOPY, 2010, 110 (03) :242-253

[9]

Charles J., 2010, DUPLEX STAINLESS STE

[10] Microstructural characterization of simulated heat affected zone in a nitrogen-containing 2205 duplex stainless steel [J].

Chen, TH ;

Yang, JR .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 338 (1-2) :166-181

← 1 2 3 4 5 →