INVESTIGATION OF INLET DISTORTION EFFECTS ON AXIAL COMPRESSOR PERFORMANCE BASED ON STREAMLINE CURVATURE METHOD

被引:3
作者
Abbasi, Sarallah [1 ]
Pirnia, Alireza [2 ]
Taghavi-Zenouz, Reza [3 ]
机构
[1] Arak Univ Technol, Dept Mech Engn, Arak, Iran
[2] Clarkson Univ, Dept Mech Engn, New York, NY USA
[3] Iran Univ Sci & Technol, Dept Mech Engn, Tehran, Iran
关键词
axial compressor; performance map; inlet distortion; surge margin; streamline curvature; STALL; PREDICTION;
D O I
10.15632/jtam-pl.56.4.1005
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
In this paper, the effects of inlet flow distortion on performance maps and details of the flow field are investigated using the Streamline Curvature Method. The results are presented for both design and off-design conditions and compared with experimental data, which shows good agreement. The effects of inlet flow distortion are investigated by inlet total pressure variation in three different cases in the way that the average total pressure remains constant and equal to the design value. The results show that a relative increase in the total pressure at tip causes an increase in the pressure ratio and efficiency as well as a better performance in the choking region. Alternatively, a relative increase in the total pressure in hub causes opposite behavior and a better performance at the surging region.
引用
收藏
页码:1005 / 1015
页数:11
相关论文
共 50 条
[31]   Performance Prediction of Transonic Axial Compressors Using Improved Streamline Curvature Approach [J].
Li Tao ;
Wu Yadong ;
Ouyang Hua .
Fluid Dynamics, 2020, 55 :121-132
[32]   Response and stabilization of a two-stage axial flow compressor restricted by rotating inlet distortion [J].
Li, Jia ;
Dong, Xu ;
Sun, Dakun ;
Xu, Ruize ;
Sun, Xiaofeng .
CHINESE JOURNAL OF AERONAUTICS, 2021, 34 (09) :72-82
[33]   Performance Prediction of Transonic Axial Compressors Using Improved Streamline Curvature Approach [J].
Tao, Li ;
Yadong, Wu ;
Hua, Ouyang .
FLUID DYNAMICS, 2020, 55 (01) :121-132
[34]   The influence of inlet flow distortion on the performance of a centrifugal compressor and the development of an improved inlet using numerical simulations [J].
Kim, Y ;
Engeda, A ;
Aungier, R ;
Direnzi, G .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2001, 215 (A3) :323-338
[35]   Improved Streamline Curvature Method for Prediction of Gas Turbines Performance [J].
Hosein Bashi ;
Vahid Esfahanian ;
Alireza Tavakoli ;
Mehran Ansari ;
Mohammad Javad Izadi ;
Mohammad Kordi .
Arabian Journal for Science and Engineering, 2024, 49 :2749-2766
[36]   Improved Streamline Curvature Method for Prediction of Gas Turbines Performance [J].
Bashi, Hosein ;
Esfahanian, Vahid ;
Tavakoli, Alireza ;
Ansari, Mehran ;
Izadi, Mohammad Javad ;
Kordi, Mohammad .
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2023, 49 (2) :2749-2766
[37]   Investigation on mechanism of perfomance improvement for compressor with new type of casing treatment with inlet distortion [J].
Zhang, Hao-Guang ;
Wang, Yun-Peng ;
Wu, Jun ;
Chu, Wu-Li ;
Wu, Yan-Hui ;
Liu, Chuan-Le .
Tuijin Jishu/Journal of Propulsion Technology, 2014, 35 (08) :1040-1047
[38]   Quasi-three-dimensional compressor performance simulation using streamline curvature and multi-parallel compressor theory [J].
Templalexis, Ioannis ;
Pilidis, Pericles ;
Pachidis, Vassilios ;
Kotsiopoulos, Petros .
Proceedings of the ASME Turbo Expo 2006, Vol 4, 2006, :297-309
[39]   Partial tip air injection to extend the stall margin in an axial flow compressor with circumferential inlet distortion [J].
Li, Jichao ;
Liu, Yang ;
Liu, Jingyuan ;
Peng, Feng ;
Zhang, Hongwu .
AEROSPACE SCIENCE AND TECHNOLOGY, 2024, 144
[40]   Blade bowing effects on radial equilibrium of inlet flow in axial compressor cascades [J].
Xu, Han ;
Chang, Hao ;
Jin, Donghai ;
Gui, Xingmin .
CHINESE JOURNAL OF AERONAUTICS, 2017, 30 (05) :1651-1659