A low power high speed single phase clock level restoring 16T master-slave flip-flop

Purpose A low power flip-flop circuit is designed for energy-efficient devices. Digital sequential circuits are in huge demand because every processor has most of the parts of digital circuit. The sequential circuits consist of a basic data storing element, a latch is used to store single bit data. The flip-flop takes a sufficient portion of the total chip area and overall power consumption as well. This study aims to the low power energy-efficient applications like laptops, mobile phones and palmtops. Design/methodology/approach This paper proposes a new type of flip-flop that consists of the only 16 transistors with a single-phase clock. The flip-flop has two blocks, master and slave latch. In this design, the authors have focused on only master latch, which includes a level restoring circuit. It is used to help the master latch in data retention process. The latch circuit has two inverters in back-to-back arrangement. The proposed flip-flop is implemented on 65 nm complementary metal oxide semiconductor technology using Cadence Virtuoso environment and compared with other reported flip-flops. Findings The proposed flip-flop architecture outperformed the peak percentage, i.e. 79.25% as compared to transmission gate flip-flop and a minimum of 20.02% compared to 18 T true single phase clocking (TSPC) improvement in terms of power. It also improved C to Q delay and power delay product. In addition, by reducing the number of transistors the total area of the proposed flip-flop is reduced by a minimum of 13.76% with respect to 18TSPC and existing flip-flop. For reliability checking the Monte Carlo simulation is performed for thousand samples and it is compared with the recently reported 18TSPC flip-flop. Originality/value This work is tested by using a test circuit with a load capacitor of 0.2 fF. The proposed work uses a new topology to work as master-slave. Power consumption of this technique is very less and it is best suitable for low power applications. This circuit is working properly up to 2 GHz frequency.