Numerical analysis of rotation loss of superconducting magnetic bearing

被引:4
|
作者
Demachi, K [1 ]
Miura, A [1 ]
Uchimoto, T [1 ]
Miya, K [1 ]
机构
[1] Univ Tokyo, Sch Engn, Nucl Engn Res Lab, Tokai, Ibaraki, Japan
关键词
superconducting flywheel; superconducting magnetic bearing; rotation losses; levitation force; eddy current flowing in cryostat of SMB;
D O I
10.1109/77.920098
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The degradation of levitation force and rotation speed is one of the most significant problems for the practical use of superconducting magnetic bearings (SMB) for flywheel energy storage system. The rotation loss is caused by the AC magnetic field due to the inhomogeneous distribution of magnetic flux density of the permanent magnet (PM) rotor. A simulation method has been developed by our group to simulate the rotation losses. In this research, this method was improved so that the eddy current flowing in the cryostat around the superconductor was taken into account. The dependency of the rotation losses of radial type SMB with cryostat were evaluated by this new simulation method with respect to the levitating height, the initial rotation speed and the amplitude of inhomogeneous component of PM rotor's field.
引用
收藏
页码:1653 / 1656
页数:4
相关论文
共 50 条
  • [31] R&D of superconducting bearing technologies for flywheel energy storage systems
    Koshizuka, N.
    PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2006, 445 (1103-1108): : 1103 - 1108
  • [32] Analysis of a new magnetic bearing for magnetic levitation stages
    Zhu, Yu
    Liu, Yu
    Zhang, Ming
    MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-3, 2011, 295-297 : 2106 - 2111
  • [33] Active permanent magnet support for a superconducting magnetic-bearing flywheel rotor
    Sivrioglu, S
    Nonami, K
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2000, 10 (04) : 1673 - 1677
  • [34] Optimization of radial-type superconducting magnetic bearing using the Taguchi method
    Ai, Liwang
    Zhang, Guomin
    Li, Wanjie
    Liu, Guole
    Liu, Qi
    PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2018, 550 : 57 - 64
  • [35] Design of an energy storage flywheel system using permanent magnet bearing (PMB) and superconducting magnetic bearing (SMB)
    Murakami, K.
    Komori, M.
    Mitsuda, H.
    Inoue, A.
    CRYOGENICS, 2007, 47 (04) : 272 - 277
  • [36] Research on a Superconducting Magnetic Bearing System for Submerged Cryogenic Disk Motor-Pump
    Ai, Liwang
    Zhang, Guomin
    Li, Wanjie
    Liu, Guole
    Song, Naihao
    Xiao, Liye
    Lin, Liangzhen
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2018, 28 (04)
  • [37] Development of a high-speed motor at extremely low temperatures with an axial self-bearing motor and a superconducting magnetic bearing
    Matsuoka, Akihiro
    Sumino, Masayuki
    Ueno, Satoshi
    Takeda, Tsunehiro
    INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 2014, 45 (1-4) : 859 - 865
  • [38] Progress of superconducting bearing technologies for flywheel energy storage systems
    Koshizuka, N
    Ishikawa, F
    Nasu, H
    Murakami, M
    Matsunaga, K
    Saito, S
    Saito, O
    Nakamura, Y
    Yamamoto, H
    Takahata, R
    Itoh, Y
    Ikezawa, H
    Tomita, M
    PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2003, 386 : 444 - 450
  • [39] Investigation of characteristics of axial gap type superconducting magnetic bearing for 1kWh flywheel
    Kawashima, H
    Nagaya, S
    Suga, T
    Unisuga, S
    Konno, K
    Minami, M
    ADVANCES IN SUPERCONDUCTIVITY XII, 2000, : 797 - 799
  • [40] Mode Coupling of a Flexible Rotor Supported by a Superconducting Magnetic Bearing Due to the Nonlinearity of Electromagnetic Force
    Gotanda, Hiroki
    Amano, Ryousuke
    Sugiura, Toshihiko
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2011, 21 (03) : 1481 - 1484