Soft-switching capabilities of SAB vs. DAB converters

被引:0
作者
Fontana, Christian [1 ]
Forato, Mattia [1 ]
Kumar, Kundan [1 ]
Outeiro, Maria T. [2 ]
Bertoluzzo, Manuele [1 ]
Buja, Giuseppe [1 ]
机构
[1] Univ Padua, Dept Ind Engn, Padua, Italy
[2] IPC SEC, Coimbra, Portugal
来源
IECON 2015 - 41ST ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY | 2015年
关键词
Single Active Bridge converters; Double Active Bridge converters; Soft-switching; Soft-switching capacitor sizing;
D O I
暂无
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
The paper is concerned with the soft-switching capabilities of the Single Active Bridge (SAB) converter. At first, soft-switching of the double active bridge converter is reviewed. Then, operation of the SAB converter is investigated with the end of assessing its soft-switching capabilities in both the discontinuous and continuous conduction mode. It is found that the SAB converter experiences either full or incomplete soft-switching depending on the working conditions. Afterwards, the procedure to size the capacitors for implementing soft-switching is illustrated. At last, an under-development power supply equipment exploiting the theoretical findings of the paper is presented together with a preliminary design of its components.
引用
收藏
页码:3485 / 3490
页数:6
相关论文
共 12 条
[1]   A novel high-efficiency battery charger with a buck zero-voltage-switching resonant converter [J].
Chuang, Ying-Chun ;
Ke, Yu-Lung .
IEEE TRANSACTIONS ON ENERGY CONVERSION, 2007, 22 (04) :848-854
[2]   Modulation Technique to Reverse Power Flow for the Isolated Series Resonant DC-DC Converter With Clamped Capacitor Voltage [J].
Du, Yu ;
Lukic, Srdjan M. ;
Jacobson, Boris S. ;
Huang, Alex Q. .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2012, 59 (12) :4617-4628
[3]  
Fonte C.B., 2015, P IEEE EL, P1
[4]   Analysis and design considerations of a load and line independent zero voltage switching full bridge DC/DC converter topology [J].
Jain, PK ;
Kang, W ;
Soin, H ;
Xi, YH .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 2002, 17 (05) :649-657
[5]   Efficiency-Optimized High-Current Dual Active Bridge Converter for Automotive Applications [J].
Krismer, Florian ;
Kolar, Johann W. .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2012, 59 (07) :2745-2760
[6]   An Isolated DC/DC Converter Using High-Frequency Unregulated LLC Resonant Converter for Fuel Cell Applications [J].
Lee, Jun-Young ;
Jeong, Yu-Seok ;
Han, Byung-Moon .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2011, 58 (07) :2926-2934
[7]   High-Efficiency Isolated Boost DCDC Converter for High-Power Low-Voltage Fuel-Cell Applications [J].
Nymand, Morten ;
Andersen, Michael A. E. .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2010, 57 (02) :505-514
[8]   Novel Bidirectional Snubberless Naturally Commutated Soft-Switching Current-Fed Full-Bridge Isolated DC/DC Converter for Fuel Cell Vehicles [J].
Pan Xuewei ;
Rathore, Akshay K. .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2014, 61 (05) :2307-2315
[9]   Solid-State Transformer Architecture Using AC-AC Dual-Active-Bridge Converter [J].
Qin, Hengsi ;
Kimball, Jonathan W. .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2013, 60 (09) :3720-3730
[10]   Soft-Switching Bidirectional Isolated Full-Bridge Converter With Active and Passive Snubbers [J].
Wu, Tsai-Fu ;
Yang, Jeng-Gung ;
Kuo, Chia-Ling ;
Wu, Yung-Chun .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2014, 61 (03) :1368-1376