Adsorption of Strontium onto Synthetic Iron(III) Oxide up to High Ionic Strength Systems

被引:6
作者
Garcia, David [1 ]
Lutzenkirchen, Johannes [2 ]
Huguenel, Maximilien [3 ]
Calmels, Lea [3 ]
Petrov, Vladimir [4 ]
Finck, Nicolas [2 ]
Schild, Dieter [2 ]
机构
[1] Amphos 21 Consulting SL, Barcelona 08019, Spain
[2] Karlsruhe Inst Technol KIT, Inst Nucl Waste Disposal INE, D-76344 Karlsruhe, Germany
[3] Ecole Europeenne Chim Polymeres & Mat Strasbourg, F-67087 Strasbourg 2, France
[4] Moscow MV Lomonosov State Univ, Dept Chem, Moscow 119991, Russia
关键词
adsorption; radionuclides; strontium; hematite; goethite; ionic strength; surface complexation model; Pitzer model; REDOX SPECIATION; ILLITE SURFACE; CLAY-MINERALS; CRYSTAL FACES; SORPTION; COMPLEXATION; THERMODYNAMICS; SOLUBILITY; INTERFACE; KINETICS;
D O I
10.3390/min11101093
中图分类号
P3 [地球物理学]; P59 [地球化学];
学科分类号
0708 ; 070902 ;
摘要
In this work, the adsorption behavior of Sr onto a synthetic iron(III) oxide (hematite with traces of goethite) has been studied. This solid, which might be considered a representative of Fe3+ solid phases (iron corrosion products), was characterized by X-Ray Diffraction (XRD) and X-Ray Photoelectron Spectroscopy (XPS), and its specific surface area was determined. Both XRD and XPS data are consistent with a mixed solid containing more than 90% hematite and 10% goethite. The solid was further characterized by fast acid-base titrations at different NaCl concentrations (from 0.1 to 5 M). Subsequently, for each background NaCl concentration used for the acid-base titrations, Sr-uptake experiments were carried out involving two different levels of Sr concentration (1 x 10(-5) and 5 x 10(-5) M, respectively) at constant solid concentration (7.3 g/L) as a function of -log([H+]/M). A Surface Complexation Model (SCM) was fitted to the experimental data, following a coupled Pitzer/surface complexation approach. The Pitzer model was applied to aqueous species. A Basic Stern Model was used for interfacial electrostatics of the system, which includes ion-specific effects via ion-specific pair-formation constants, whereas the Pitzer-approach involves ion-interaction parameters that enter the model through activity coefficients for aqueous species. A simple 1-pK model was applied (generic surface species, denoted as > XOH-1/2). Parameter fitting was carried out using the general parameter estimation software UCODE, coupled to a modified version of FITEQL2. The combined approach describes the full set of data reasonably well and involves two Sr-surface complexes, one of them including chloride. Monodentate and bidentate models were tested and were found to perform equally well. The SCM is particularly able to account for the incomplete uptake of Sr at higher salt levels, supporting the idea that adsorption models conventionally used in salt concentrations below 1 M are applicable to high salt concentrations if the correct activity corrections for the aqueous species are applied. This generates a self-consistent model framework involving a practical approach for semi-mechanistic SCMs. The model framework of coupling conventional electrostatic double layer models for the surface with a Pitzer approach for the bulk solution earlier tested with strongly adsorbing solutes is here shown to be successful for more weakly adsorbing solutes.
引用
收藏
页数:17
相关论文
共 50 条
[41]   Kinetics of nitrate adsorption and reduction by nano-scale zero valent iron (NZVI): Effect of ionic strength and initial pH [J].
Kim, Do-Gun ;
Hwang, Yu-Hoon ;
Shin, Hang-Sik ;
Ko, Seok-Oh .
KSCE JOURNAL OF CIVIL ENGINEERING, 2016, 20 (01) :175-187
[42]   Adsorption of Graphene Oxide onto Synthetic Fibers: Experimental Conditions [J].
E. Giménez-Martín ;
J. A. Moleón-Baca ;
A. Ontiveros-Ortega ;
I. Plaza .
Fibers and Polymers, 2018, 19 :2254-2267
[43]   Preliminary investigation of phosphorus adsorption onto two types of iron oxide-organic matter complexes [J].
Yan, Jinlong ;
Jiang, Tao ;
Yao, Ying ;
Lu, Song ;
Wang, Qilei ;
Wei, Shiqiang .
JOURNAL OF ENVIRONMENTAL SCIENCES, 2016, 42 :152-162
[44]   Arsenic removal from aqueous solutions by adsorption onto iron oxide/activated carbon magnetic composite [J].
Yao, Shuhua ;
Liu, Ziru ;
Shi, Zhongliang .
JOURNAL OF ENVIRONMENTAL HEALTH SCIENCE AND ENGINEERING, 2014, 12
[45]   Arsenite removal by adsorption onto iron oxide-coated pumice and sepiolite [J].
Oztel, Merve Donmez ;
Akbal, Feryal ;
Altas, Levent .
ENVIRONMENTAL EARTH SCIENCES, 2015, 73 (08) :4461-4471
[46]   Characteristics of fluoride adsorption onto aluminium(III) and iron(III) hydroxide flocs [J].
Hamamoto, Shinya ;
Kishimoto, Naoyuki .
SEPARATION SCIENCE AND TECHNOLOGY, 2017, 52 (01) :42-50
[47]   Molybdate Recovery by Adsorption onto Silica Matrix and Iron Oxide Based Composites [J].
Matusoiu, Florin ;
Negrea, Adina ;
Ciopec, Mihaela ;
Duteanu, Narcis ;
Negrea, Petru ;
Svera, Paula ;
Ianasi, Catalin .
GELS, 2022, 8 (02)
[48]   Effect of the ionic strength on the redox reaction of dicyanobis(bipyridine)iron(III)-iodide in binary and ternary solvent systems [J].
Khattak, Rozina ;
Khan, Muhammad Sufaid ;
Ullah, Rizwan ;
Bibi, Zainab ;
Sony ;
Ali, Mahnoor ;
Rahman, Wajeeha ;
Hakeem, Faryal ;
Ayaz, Kainat ;
Bibi, Zainab .
INTERNATIONAL JOURNAL OF CHEMICAL KINETICS, 2021, 53 (01) :16-26
[49]   Performances of As(V) adsorption of calcined (250°C) synthetic iron(III)-aluminum(III) mixed oxide in the presence of some groundwater occurring ions [J].
Basu, Tina ;
Gupta, Kaushik ;
Ghosh, Uday Chand .
CHEMICAL ENGINEERING JOURNAL, 2012, 183 :303-314
[50]   Adsorption of Cesium, Cobalt, and Lead onto a Synthetic Nano Manganese Oxide: Behavior and Mechanism [J].
Jamal Al Abdullah ;
Abdul G. Al Lafi ;
Wafa’a Al Masri ;
Yusr Amin ;
Tasneem Alnama .
Water, Air, & Soil Pollution, 2016, 227