Noble metal containing Al/Ce/Mg pillared montmorillonite clay as catalysts in the hydrotreating of LCO fractions

被引:24
作者
Albertazzi, S
Baraldini, I
Busca, G
Finocchio, E
Lenarda, M
Storaro, L
Talon, A
Vaccari, A
机构
[1] Univ Bologna, Dipartimento Chim Ind & Mat, INSTM UdR Bologna, I-40136 Bologna, BO, Italy
[2] Univ Genoa, INSTM UdR Genova, Dipartimento Ingn Chim & Proc, I-16129 Genoa, Italy
[3] Univ Venice, Dipartimento Chim, ISTM UdR Venezia, I-30173 Venice, VE, Italy
关键词
pillared layered clays; hydrogenation; hydrogenolysis/ring-opening; naphthalene; Pd/Pt; Pd/Au;
D O I
10.1016/j.clay.2005.01.003
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
An Al/Ce/Mg 50.0/1.0/1.0 atomic ratio (a.r.) pillared montmorillonite was used to support 1.0 wt.% of the bimetallic species Pd/Pt=5.0 and Pd/Au=5.0 a.r. The resulting catalysts were characterized by XRPD, N-2 physisorption, ammonia TPD and FT-IR spectroscopy. The catalytic activity in the hydrogenation and hydrogenolysis/ring-opening of naphthalene and thio-tolerance to dibenzothiophene were investigated at 6.0 MPa in a flow reactor. Both catalysts showed interesting performances. Of the two catalysts, the former showed higher productivities in hydrogenation and hydrogenolysis/ring-opening compounds together with lower losses in carbon balance and higher thio-tolerance. These results not only confirmed that Pd/pt is one of the most suitable bimetallic pair for noble metal containing hydrotreating catalysts, but also that the Al/Ce/mg PILC can be used as low cost support for noble-metal-containing active phases. (C) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码:224 / 234
页数:11
相关论文
共 35 条
  • [1] New Pd/Pt on Mg/Al basic mixed oxides for the hydrogenation and hydrogenolysis of naphthalene
    Albertazzi, S
    Busca, G
    Finocchio, E
    Glöckler, R
    Vaccari, A
    [J]. JOURNAL OF CATALYSIS, 2004, 223 (02) : 372 - 381
  • [2] Hydrogenation of naphthalene on noble-metal-containing mesoporous MCM-41 aluminosilicates
    Albertazzi, S
    Ganzerla, R
    Gobbi, C
    Lenarda, M
    Mandreoli, M
    Salatelli, E
    Savini, P
    Storaro, L
    Vaccari, A
    [J]. JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL, 2003, 200 (1-2) : 261 - 270
  • [3] Methyl-naphthalene hydrogenation on Pt/HY-Al2O3 catalysts.: An approach to hydrogenation of polyaromatic hydrocarbon mixture
    Arias, PL
    Cambra, JF
    Güemez, B
    Barrio, VL
    Navarro, R
    Pawelec, B
    Fierro, JLG
    [J]. FUEL PROCESSING TECHNOLOGY, 2000, 64 (1-3) : 117 - 133
  • [4] Modification of the Pd/SiO2-Al2O3 catalyst's thioresistance by the addition of a second metal (Pt, Ru, and Ni)
    Barrio, VL
    Arias, PL
    Cambra, JF
    Güemez, MB
    Pawelec, B
    Fierro, JLG
    [J]. CATALYSIS COMMUNICATIONS, 2004, 5 (04) : 173 - 178
  • [5] Aromatics hydrogenation on silica-alumina supported palladium-nickel catalysts
    Barrio, VL
    Arias, PL
    Cambra, JF
    Güemez, MB
    Pawelec, B
    Fierro, JLG
    [J]. APPLIED CATALYSIS A-GENERAL, 2003, 242 (01) : 17 - 30
  • [6] Au/TiO2 nanostructured catalyst:: effects of gold particle sizes on CO oxidation at 90 K
    Boccuzzi, F
    Chiorino, A
    Manzoli, M
    [J]. MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 2001, 15 (1-2): : 215 - 217
  • [7] Abatement of volatile organic compounds: oxidation of ethanal over niobium oxide-supported palladium-based catalysts
    Brayner, R
    Cunha, DD
    Bozon-Verduraz, F
    [J]. CATALYSIS TODAY, 2003, 78 (1-4) : 419 - 432
  • [8] Aromatic saturation of distillates: An overview
    Cooper, BH
    Donnis, BBL
    [J]. APPLIED CATALYSIS A-GENERAL, 1996, 137 (02) : 203 - 223
  • [9] Decalin and tetralin as probe molecules for cracking and hydrotreating the light cycle oil
    Corma, A
    González-Alfaro, V
    Orchillés, AV
    [J]. JOURNAL OF CATALYSIS, 2001, 200 (01) : 34 - 44
  • [10] Porous clays and pillared clays-based catalysts. Part 2: A review of the catalytic and molecular sieve applications
    Ding, Z
    Kloprogge, JT
    Frost, RL
    Lu, GQ
    Zhu, HY
    [J]. JOURNAL OF POROUS MATERIALS, 2001, 8 (04) : 273 - 293