Serviceability limit state of two-way reinforced concrete slab strengthened with different techniques

The experimental results for service load of sixteen simply supported two way reinforced concrete slabs under the action of concentrated patch load were determined based on the amount of permissible deflections and the crack widths.All the slabs had the same overall dimensions and flexural steel reinforcement. Five types of strengthening were adopted. The first and second methods include applying either near surface mounted (NSM) or near reinforcement mounted (NRM) ferrocement layers. While the third method includes applying a concrete layer reinforced with welded wire fabric mesh of various diameters. The fourth and fifth methods include fixing CFRP rods and laminates, respectively, on the bottom surface of slabs. Strengthening techniques were applied on the bottom surface of fifteen slab specimens. In addition, a control slab specimen without any strengthening was used for the purpose of comparison. The calculated results for ultimate loads based on serviceability requirements (deflection and crack width according to both ACI and BS formulae) were lower than the experimental results.