Hydrodynamic and heat transfer characteristics of a centrally heated cylindrical enclosure: CFD simulations and experimental measurements

Natural convection in enclosures is of importance in many engineering applications. The stratification arising out of natural convection may be desirable/undesirable depending on applications. In order to control the degree of stratification, understanding of flow pattern and temperature profiles is required. In the present work, transient natural convection in a cylindrical enclosure has been investigated for water with CFD simulations and flow visualization [using particle image velocimetry (PIV) and hot film anemometry (HFA)] over a wide range of parameters namely Rayleigh number (1.08 x 10(11) <= Ra <= 3.76 x 10(13)) and aspect ratio (1 <= H/R <= 2). The effect of various parameters like pressure, tube diameter and aspect ratio on the extent of stratification has been studied. Ply measurements have been performed to understand the transient flow behavior. Multiple thermocouples were used to measure the temperature profiles. CFD simulations have been performed using SST k-omega model and the results have been compared with the PIV measurements. The CFD simulations have been carried out for 2D axi-symmetric cases and the effect of boundary conditions (free-slip and no-slip) has been investigated. An excellent agreement was found between the CFD predictions and the experimental measurements of flow and temperature patterns. The extent of stratification has been quantified using dimensionless parameters like stratification number and stratification time. The kinetic energy profiles and kinetic energy dissipation profiles show that almost 75% of the enclosure is stratified (after different times depending on Ra number and the aspect ratio). The turbulence parameters were found to weaken with time in the stratified region and these predictions are corroborated with HFA measurements. (C) 2011 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.