Method for Testing Motion Analysis Laboratory Measurement Systems

This paper proposes a method for comparing data from accelerometers, optical based 3D motion capture systems, and force platforms (FPs) in the context of spatial and temporal differences. Testing method is based on the motion laboratory accreditation test (MLAT), which can be used to test FP and camera based motion capture components of a motion analysis laboratory. This study extends MLAT to include accelerometer data. Accelerometers were attached to a device similar to the MLAT rod. The elevation of the rod from the plane of the floor is computed and compared with the force platform vector orientation and the rod orientation obtained by optical motion capture system. Orientation of the test device is achieved by forming nonlinear equation group, which describes the components of the measured accelerations. Solution for this equation group is estimated by using the Gauss-Newton method. This expanded MLAT procedure can be used in the laboratory setting were either FP, camera based motion capture, or any other motion capture system is used along with accelerometer measurements. [DOI:10.1115/1.4002368]