Prediction of residual stresses and springback after bending of a textured aluminium plate

被引:3
作者
Delannay, L
Logé, RE
Chastel, Y
Van Houtte, P
机构
[1] Ecole Mines, Ctr Mat Forming, CEMEF, UMR 7635 CNRS, F-06904 Sophia Antipolis, France
[2] Katholieke Univ Leuven, Dept Met & Mat Engn, MTM, B-3001 Heverlee, Belgium
来源
JOURNAL DE PHYSIQUE IV | 2003年 / 105卷
关键词
D O I
10.1051/jp4:20030185
中图分类号
O4 [物理学];
学科分类号
0702 ;
摘要
In this work, we attempt to simulate residual stresses and springback of a deformed metal part based on a micro-macro modelling of the elastic and plastic strains. Samples cut out of an aluminium plate, under different angles relative to the rolling direction, have been bent around a die. The springback angle has been measured in order to estimate the accuracy of numerical simulations. To start, a finite element code with an isotropic material law is applied, showing that most plate sections deform under the action of a pure bending moment (i.e. shear forces are negligible). Using this result, the effect of texture on the elastic springback is simulated with a polycrystalline elastic-plastic theory. Here, the stress state is computed for different layers across the plate under the hypothesis of a homogeneously deforming polycrystal. Unloading is simulated subsequently by reducing the bending moment down to zero. The predictions are compared to the experimental results and the stress profile across the plate thickness is analysed during loading and after unloading. In the discussion, attention is paid to the effects of anisotropy and the relevance of implementing polycrystalline elasto-plasticity into finite element modelling.
引用
收藏
页码:175 / 182
页数:8
相关论文
共 8 条
[1]   An overview of numerical modelling techniques [J].
Chenot, JL ;
Bay, F .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1998, 80-1 :8-15
[2]  
DELANNAY L, IN PRESS ACTA MAT
[3]  
Hill R., 1950, The Mathematical Theory of Plasticity
[4]  
Hosford W.F., 1993, The Mechanics of Crystals and Texture Polycrystals
[5]  
Hosford WF, 1983, METAL FORMING MECH M
[6]   Forming limits prediction using rate-independent polycrystalline plasticity [J].
Knockaert, R ;
Chastel, Y ;
Massoni, E .
INTERNATIONAL JOURNAL OF PLASTICITY, 2002, 18 (02) :231-247
[7]   LARGE STRAIN WORK-HARDENING AND TEXTURES [J].
SEVILLANO, JG ;
VANHOUTTE, P ;
AERNOUDT, E .
PROGRESS IN MATERIALS SCIENCE, 1980, 25 (2-4) :69-412
[8]   MATHEMATICAL-MODELING OF PLANE-STRAIN BENDING OF SHEET AND PLATE [J].
WANG, CT ;
KINZEL, G ;
ALTAN, T .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1993, 39 (3-4) :279-304