Finite element simulation for coffee (Coffea arabica) drying

This paper describes moisture diffusivity, shrinkage, equilibrium moisture content and finite element simulated drying of coffee. The moisture diffusivities in different components of parchment coffee were determined by minimizing the sum of square of deviations between the predicted and the experimental values of moisture contents during thin layer drying under cor trolled conditions of drying air temperature and relative humidity. The drying of coffee bean and parchment was conducted in thin layers at a temperature of 40, 50 and 60 degrees C with relative humidity in the range of 14-25%. The mean diffasivity values of coffee bean and parchment are related to the temperatures and are expressed by Arrhenius-type equations. The moisture diffusivities of parchment are lower than those of the coffee bean. The shrinkage of coffee bean derived from experiments is expressed as a function of moisture reduction. GAB model is sufficient for the prediction for sorption isotherm of parchment coffee and the parameters of the GAB model are a function of temperature and it is expressed by Arrhenius-type equations. Sensory evaluation of the coffee dried at 40,50 and 60 degrees C shows that the overall acceptance by coffee cupping test and the concentration of caffeine is within the acceptable limit. A two-dimensional finite element model was developed for simulate moisture diffusion during drying process of parchment coffee. The finite element model was programmed in Compaq Visual FORTRAN version 6.5. The model simulates the moisture contents in different components of parchment coffee well and it provides a better understanding of the transport processes in the different components of the parchment coffee. (C) 2011 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.