Microstructure and Tribological Properties of TiCN-containing Composite Coatings Produced on Pure Ti Substrate by Laser Surface Alloying

被引：0

作者：

Guo, C. ^{[1
,2
]}

Zhou, J-S. ^{[1
]}

Zhao, J-R. ^{[1
]}

Yu, Y-J. ^{[1
,2
]}

Zhou, H-D. ^{[1
]}

Chen, J-M. ^{[1
]}

机构：

[1] Chinese Acad Sci, Lanzhou Inst Chem Phys, Lanzhou 730000, Peoples R China

[2] Chinese Acad Sci, Grad Univ, Beijing 100039, Peoples R China

来源：

LASERS IN ENGINEERING | 2011年 / 21卷 / 1-2期

关键词：

TiCN composite coating; pure Ti; CO(2) laser; laser surface alloying; microstructure; friction properties; wear properties; TI-6AL-4V ALLOY; WEAR-RESISTANCE; TITANIUM-ALLOYS; FRETTING WEAR; BEHAVIOR; TI6AL4V; PVD; DRY;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

TiCN-containing composite coatings were fabricated on pure Ti substrates by laser surface alloying with pre-placed TiCN powder. The microstructures of the TiCN-containing composite coatings were investigated and the friction and wear behaviour of the TiCN-containing composite coatings under dry sliding condition was evaluated under different normal loads. It was found that the composite coatings were mainly composed of TiC(0.3)N(0.7), TiN, TiN(0.3), and TiC phases, and the two types of TiCN-containing composite coatings produced by two laser processing parameters had higher microhardness and better wear resistance than pure Ti substrate.

引用

页码：63 / 76

页数：14

共 38 条

[31] Fretting wear studies on uncoated, plasma nitrided and laser nitrided biomedical titanium alloys [J].

Vadiraj, Aravind ;

Kamaraj, M. ;

Gnanamoorthy, R. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 445 :446-453

[32]

Wang X, 2004, RARE METAL MAT ENG, V33, P204

[33] Synthesis of Ti(C,N) ultrafine powders by carbothermal reduction of TiO2 derived from sol-gel process [J].

Xiang, JH ;

Xie, ZP ;

Huang, Y ;

Xiao, H .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2000, 20 (07) :933-938

[34] Tribological behavior of a TiSiCN coating tested in air and coolant [J].

Xu, H. ;

Nie, X. ;

Wei, R. .

SURFACE & COATINGS TECHNOLOGY, 2006, 201 (07) :4236-4241

[35] Microstructure and wear properties of TiCN/Ti coatings on titanium alloy by laser cladding [J].

Yang, Yuling ;

Zhang, Duo ;

Yan, Wei ;

Zheng, Yiran .

OPTICS AND LASERS IN ENGINEERING, 2010, 48 (01) :119-124

[36] Plasma nitriding behavior of Ti6Al4V orthopedic alloy [J].

Yildiz, F. ;

Yetim, A. F. ;

Alsaran, A. ;

Celik, A. .

SURFACE & COATINGS TECHNOLOGY, 2008, 202 (11) :2471-2476

[37] Tribological properties of nanostructured and conventional WC-Co coatings deposited by plasma spraying [J].

Zhu, YC ;

Yukimura, K ;

Ding, CX ;

Zhang, PY .

THIN SOLID FILMS, 2001, 388 (1-2) :277-282

[38] Tribological properties of duplex treated TiN/TiCN coatings on plasma nitrided PH15-5 steel [J].

Zukerman, I. ;

Raveh, A. ;

Landau, Y. ;

Weiss, R. ;

Shneck, R. ;

Shneor, Y. ;

Kalman, H. ;

Klemberg-Saphieha, J. E. ;

Martinu, L. .

SURFACE & COATINGS TECHNOLOGY, 2007, 201 (13) :6171-6175

← 1 2 3 4 →