Microstructure and Tribological Properties of TiCN-containing Composite Coatings Produced on Pure Ti Substrate by Laser Surface Alloying

被引：0

作者：

Guo, C. ^{[1
,2
]}

Zhou, J-S. ^{[1
]}

Zhao, J-R. ^{[1
]}

Yu, Y-J. ^{[1
,2
]}

Zhou, H-D. ^{[1
]}

Chen, J-M. ^{[1
]}

机构：

[1] Chinese Acad Sci, Lanzhou Inst Chem Phys, Lanzhou 730000, Peoples R China

[2] Chinese Acad Sci, Grad Univ, Beijing 100039, Peoples R China

来源：

LASERS IN ENGINEERING | 2011年 / 21卷 / 1-2期

关键词：

TiCN composite coating; pure Ti; CO(2) laser; laser surface alloying; microstructure; friction properties; wear properties; TI-6AL-4V ALLOY; WEAR-RESISTANCE; TITANIUM-ALLOYS; FRETTING WEAR; BEHAVIOR; TI6AL4V; PVD; DRY;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

TiCN-containing composite coatings were fabricated on pure Ti substrates by laser surface alloying with pre-placed TiCN powder. The microstructures of the TiCN-containing composite coatings were investigated and the friction and wear behaviour of the TiCN-containing composite coatings under dry sliding condition was evaluated under different normal loads. It was found that the composite coatings were mainly composed of TiC(0.3)N(0.7), TiN, TiN(0.3), and TiC phases, and the two types of TiCN-containing composite coatings produced by two laser processing parameters had higher microhardness and better wear resistance than pure Ti substrate.

引用

页码：63 / 76

页数：14

共 38 条

[21] In-situ laser-fabrication and characterization of TiC-containing Ti-Co composite on pure Ti substrate [J].

Langelier, Brian C. ;

Esmaeili, Shahrzad .

JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 482 (1-2) :246-252

[22] Fretting wear behavior of cu-al coating on Ti-6Al-4V substrate under dry and wet (lubricated) contact condition [J].

Lee, Hyukjae ;

Mall, Shankar ;

Murray, Karl N. .

TRIBOLOGY LETTERS, 2007, 28 (01) :19-25

[23]

Liu HX, 2005, RARE METAL MAT ENG, V34, P1318

[24] HREM study of TiB/Ti interfaces in a Ti-TiB-TiC in situ composite [J].

Lu, WJ ;

Zhang, D ;

Zhang, XN ;

Wu, RJ ;

Sakata, T ;

Mori, H .

SCRIPTA MATERIALIA, 2001, 44 (07) :1069-1075

[25] Tribological behavior of TiCN-based cermets at elevated temperatures [J].

Meng, JH ;

Lu, JJ ;

Wang, JB ;

Yang, SR .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 418 (1-2) :68-76

[26] Abrasive wear behaviour of laser clad and flame sprayed-melted NiCrBSi coatings [J].

Navas, C. ;

Colaco, R. ;

de Damborenea, J. ;

Vilar, R. .

SURFACE & COATINGS TECHNOLOGY, 2006, 200 (24) :6854-6862

[27] Sliding wear of titanium nitride thin films deposited on Ti-6Al-4V alloy by PVD and plasma nitriding processes [J].

Nolan, D ;

Huang, SW ;

Leskovsek, V ;

Braun, S .

SURFACE & COATINGS TECHNOLOGY, 2006, 200 (20-21) :5698-5705

[28] Analysis of the growth morphology of TiB and the microstructure refinement of the coatings fabricated on Ti-6Al-4V by laser boronizing [J].

Tian, Y. S. ;

Zhang, Q. Y. ;

Wang, D. Y. ;

Chen, C. Z. .

CRYSTAL GROWTH & DESIGN, 2008, 8 (02) :700-703

[29] Effect of laser processing parameters on the coating's microstructure and quality [J].

Tian, Y. S. ;

Wang, D. Y. ;

Chen, C. Z. .

SURFACE REVIEW AND LETTERS, 2007, 14 (05) :885-890

[30] Evaluation of surface-modified Ti-6Al-4V alloy by combination of plasma-carburizing and deep-rolling [J].

Tsuji, N. ;

Tanaka, S. ;

Takasugi, T. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 488 (1-2) :139-145

← 1 2 3 4 →