Analysis of Quenching Parameters in AISI 4340 Steel by Using Design of Experiments

被引：0
作者：
Nunes, Marlon Muniz [1 ]
da Silva, Uardo Miguel [2 ]
Renzetti, Reny Angela [1 ]
Brito, Tarcisio Goncalves [1 ]
机构：
[1] Univ Fed Itajuba UNIFEI, Itabira, MG, Brazil
[2] Univ Fed Sao Joao Del Rei UFSJ, Santo Antonio, MG, Brazil
来源：
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS | 2019年 / 22卷 / 01期
关键词：
quenching; design of experiments; Navy C-rings; MECHANICAL-PROPERTIES; HEAT-TREATMENT; C-RING; MICROSTRUCTURE;
D O I：
10.1590/1980-5373-MR-2018-0315
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper aims to investigate the effects of quenching parameters (temperature and time of austenitizing and cooling rate) on the microstructure, hardness and distortion of AISI 4340 steel by Design of Experiments (DoE). The factorial design was used to determine the influence of the factors on the response variable. After quench samples were characterized by optical and scanning electron microscopy, hardness test and dimensional analysis. Navy C-rings samples are used to determine the distortions after quenching due to development of residual stresses caused by non-uniform cooling. Results show that the cooling rate has a significant effect on the steel after quenching, however, the suitability of all factors is important to achieve the desired properties.
引用
收藏
页数：7
相关论文
共 50 条
  • [1] Effect of Quenching Parameters on Distortion Phenomena in AISI 4340 Steel
    Daniel Lopez-Garcia, Ricardo
    Medina-Juarez, Israel
    Maldonado-Reyes, Araceli
    METALS, 2022, 12 (05)
  • [2] Development of Optimized Mechanical Properties of AISI 4340 Steel: Role of Quenching and Partitioning Process
    Tikhe, Omkar
    Doiphode, Pravin
    Nichul, Unissa
    Singh, Rajkumar
    Hiwarkar, Vijay
    METALS AND MATERIALS INTERNATIONAL, 2023, 29 (08) : 2216 - 2227
  • [3] Effect of Selected Cooling and Deformation Parameters on the Structure and Properties of AISI 4340 Steel
    Eckert, Maros
    Krbata, Michal
    Barenyi, Igor
    Majerik, Jozef
    Dubec, Andrej
    Bokes, Michal
    MATERIALS, 2020, 13 (23) : 1 - 22
  • [4] Study of Cooling Medium Variables during Quenching in SAE 4340 Steel Using Statistical and Modeling Tools
    Puga-Patlan, Carlos
    Lopez-Garcia, Ricardo Daniel
    Medina-Juarez, Israel
    Maldonado-Reyes, Araceli
    Reyes-Gallegos, Maria Magdalena
    METALS, 2023, 13 (09)
  • [5] Processing parameters optimization in hot forging of AISI 4340 steel using instability map and reinforcement learning
    Jeong, Ho Young
    Park, Joonhee
    Kim, Yosep
    Shin, Sang Yun
    Kim, Naksoo
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 23 : 1995 - 2009
  • [6] Improvement of AISI 4340 steel properties by intermediate quenching – microstructure, mechanical properties, and fractography
    Mehrabi A.
    Sharifi H.
    Asadabad M.A.
    Najafabadi R.A.
    Rajaee A.
    International Journal of Materials Research, 2020, 111 (09) : 771 - 779
  • [7] Effect of Interrupted Quenching on the Microstructure, Mechanical Properties and Dislocation Density of Steel AISI 4340
    Nalcaci, Burak
    Aydin, Omer Cihad
    Yilmaz, Salih
    Kilicli, Volkan
    METAL SCIENCE AND HEAT TREATMENT, 2023,
  • [8] Development of Optimized Mechanical Properties of AISI 4340 Steel: Role of Quenching and Partitioning Process
    Omkar Tikhe
    Pravin Doiphode
    Unissa Nichul
    Rajkumar Singh
    Vijay Hiwarkar
    Metals and Materials International, 2023, 29 : 2216 - 2227
  • [9] A New Step Heat Treatment for Steel AISI 4340
    Safi, Seyed Majid
    Givi, Mohammad Kazem Besharati
    METAL SCIENCE AND HEAT TREATMENT, 2014, 56 (1-2) : 78 - 80
  • [10] Rapid hardening of AISI 4340 steel induced by electropulsing treatment
    Ben, D. D.
    Yang, H. J.
    Ma, Y. R.
    Shao, X. H.
    Pang, J. C.
    Zhang, Z. F.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 725 : 28 - 32
12345