Absorption of Carbon Dioxide at High Temperature with Molten Alkali Carbonate Using Bubble Column Reactor

被引:13
作者
Kanai, Yugo [1 ]
Terasaka, Koichi [2 ]
Fujioka, Satoko [2 ]
Fukunaga, Kenichiro [3 ]
机构
[1] Fukuoka Univ, Dept Chem Engn, Jonan Ku, 8-19-1 Nanakuma, Fukuoka, Fukuoka 8140180, Japan
[2] Keio Univ, Dept Appl Chem, Kohoku Ku, 3-14-1 Hiyoshi, Yokohama, Kanagawa 2238522, Japan
[3] Keio Univ, Grad Sch, Sch Sci Open & Environm Syst, Kohoku Ku, 3-14-1 Hiyoshi, Yokohama, Kanagawa 2238522, Japan
关键词
CO(2 )Absorption; Molten Salt; Molten Alkali Carbonate; Bubble Column; High Temperature; LITHIUM-CARBONATE; EUTECTIC MIXTURE; CO2; SOLUBILITY; CONVERSION; CAPTURE; SALT;
D O I
10.1252/jcej.17we399
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The purpose of this study is to examine the possibility of establishing a novel CO2 absorption process with molten alkali carbonate using a bubble column reactor. In our previous study, a hot CO2 recovery process using Li4SiO4 suspended in molten Li2CO3-K2CO3 was developed. In the process, molten alkali carbonate itself showed great potential for CO2 absorption at high temperature. If a hot CO2 absorption process were established using only molten alkali carbonate, it could make the system simpler and the operating temperature range could be extended without the limitation of reaction temperature of solid absorbent. In the study, molten Li2CO3, Na2CO3, K2CO3 and its eutectic mixture were selected as CO2 absorbent. A bubble column was chosen as the device for gas absorption at high temperature. First, the CO2 absorption performance of each single molten alkali carbonate was investigated. The result showed that the molten Li2CO3 had a great ability to absorb CO2 at high temperature. Li2O was thought to be produced by decomposition of Li2CO3 during the melting and purging process and a reaction of CO2 with Li2O occurred during the absorption process. Further, the CO2 absorption performance of eutectic mixture increased exponentially with increasing the ratio of Li2CO3 in composition. Second, the possibility of establishing a CO2 absorption process using molten Li(2)CO(3 )was examined. The overall CO2 absorption process in the bubble column was investigated and the experimental results showed that the mass transfer of CO2 into molten Li2CO3 was the rate-controlling step. The operational conditions of the bubble column were optimized. The superficial gas velocity was an important operational parameter that affected both the CO2 absorption rate and total amount of CO2 finally absorbed in the bubble column. The operating temperature also greatly affected the amount of absorbed CO2.
引用
收藏
页码:31 / 40
页数:10
相关论文
共 50 条
[41]   Experimental studies on removal capacity of carbon dioxide by a packed reactor and a spray column using aqueous ammonia [J].
Zeng Qing ;
Guo Yincheng ;
Niu Zhenqi .
10TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, 2011, 4 :519-524
[42]   The Establishment of Experimental Method to Observe Bubble Formation in High Temperature Molten Salt System and Estimation of Generated Bubble Size [J].
Kanai, Yugo ;
Terasaka, Koichi ;
Fujioka, Satoko ;
Suzukawa, Kazumi .
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2017, 50 (02) :86-93
[43]   Synthesis of different modified magnetic nanoparticles for selective physical/chemical absorption of CO2 in a bubble column reactor [J].
Elhambakhsh, Abbas ;
Zaeri, Mohammad Reza ;
Mehdipour, Morteza ;
Keshavarz, Peyman .
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, 2020, 8 (05)
[44]   Modeling and characterization of molten carbonate fuel cell for electricity generation and carbon dioxide capture [J].
Carapellucci, Roberto ;
Cipollone, Roberto ;
Di Battista, Davide .
ATI 2017 - 72ND CONFERENCE OF THE ITALIAN THERMAL MACHINES ENGINEERING ASSOCIATION, 2017, 126 :477-484
[45]   Simulation on direct contact heat transfer in gas-molten salt bubble column for high temperature solar thermal storage [J].
Pu, Wenhao ;
Yang, Ning ;
Yue, Chen ;
Bai, Shuang ;
Chen, Yitung .
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2019, 104 :51-59
[46]   Plasma Bubble Column Reactor: A High Throughput Reactor Design for Water Treatment [J].
Vasilev, Mikhail ;
Stephens, Robert ;
Muller, Meredith ;
Thagard, Selma Mededovic .
PLASMA CHEMISTRY AND PLASMA PROCESSING, 2024, 44 (04) :1773-1796
[47]   Kinetics of carbon dioxide absorption in aqueous blend of 1-(2-aminoethyl) piperazine using a stirred cell reactor [J].
Dash, Sukanta Kumar ;
Sharma, Ishanee .
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, 2023, 32 (22) :13193-13207
[48]   Gas-Liquid Mass Transfer in a Slurry Bubble Column Reactor under High Temperature and High Pressure [J].
杨卫国 ;
王金福 ;
金涌 .
ChineseJournalofChemicalEngineering, 2001, (03) :29-33
[49]   Gas-liquid mass transfer in a slurry bubble column reactor under high temperature and high pressure [J].
Yang, WG ;
Wang, JF ;
Jin, Y .
CHINESE JOURNAL OF CHEMICAL ENGINEERING, 2001, 9 (03) :253-257
[50]   Cost effective production of high quality multilayer graphene in molten Sn bubble column by using CH4 as carbon source [J].
Qiao, Changcang ;
Che, Jian ;
Wang, Junseng ;
Wang, Xiufang ;
Qiu, Song ;
Wu, Wei ;
Chen, Yuanzheng ;
Zu, Xiaotao ;
Tang, Yongliang .
JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 930