Temperature measurement in high speed milling Ti6Al4V

被引：32

作者：

Li, L ^{[1
]}

Chang, H ^{[1
]}

Wang, M ^{[1
]}

Zuo, DW ^{[1
]}

He, L ^{[1
]}

机构：

[1] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing 210016, Peoples R China

来源：

ADVANCES IN GRINDING AND ABRASIVE PROCESSES | 2004年 / 259-2卷

关键词：

high speed milling; temperature measurement; titanium alloy;

D O I：

10.4028/www.scientific.net/KEM.259-260.804

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Most of the information available is based on observations made during commercial production of titanium components in the aerospace industry. Titanium alloys are used widely where the strength-to-weight ratio and corrosion resistance are of the utmost importance. These alloys have been classified as 'difficult-to-machine' materials. Research work has been carried out to determine the temperature field in the cutting zone of titanium alloy Ti6Al4V during high speed milling. In the present work, uncoated cemented carbide tools were used in the milling of Ti6Al4V. The experiments were carried out under dry cutting conditions. Tests were performed on a Mikron 18000 rpm high speed machining centre and temperatures were measured using the implanted workpiece thermocouple techniques.

引用

页码：804 / 808

页数：5

共 15 条

[1]

Alvelid B., 1970, ANN CIRP, V18, P547

[2]

BROOKES CA, 1991, IDR, V2, P89

[3] THERMOELECTRIC SIGNAL CHARACTERISTICS AND AVERAGE INTERFACIAL TEMPERATURES IN THE MACHINING OF METALS UNDER GEOMETRICALLY DEFINED CONDITIONS [J].

BYRNE, G .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1987, 27 (02) :215-224

[4]

DEARNLEY PA, 1986, MATER SCI TECH SER, V2, P47, DOI 10.1179/026708386790123611

[5]

Dewes RC, 1999, J MATER PROCESS TECH, V93, P293

[6]

GROOVER MP, 1971, T ASME, V93, P603

[7]

Hartung P.D., 1982, CIRP ANN-MANUF TECHN, V31, P75, DOI [10.1016/S0007-8506(07)63272-7, DOI 10.1016/S0007-8506(07)63272-7]

[8] Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti-6Al-6V-2Sn [J].

Kitagawa, T ;

Kubo, A ;

Maekawa, K .

WEAR, 1997, 202 (02) :142-148

[9]

NAKAYAMA K, 1966, ANN CIRP, V14, P211

[10]

NARUTAKI N, 2002, MECH ENG E, V15, P109

← 1 2 →