Effect of contaminant on the durability of epoxy adhesive bonds with Alclad 2024 aluminium alloy adherends

被引：0
作者：
OlssonJacques, CL
Wilson, AR
Rider, AN
Arnott, DR
机构：
[1] DSTO Aero. and Mar. Res. Laboratory, 506 Lorimer St. Fishermen's Bend
来源：
SURFACE AND INTERFACE ANALYSIS | 1996年 / 24卷 / 09期
关键词：
D O I：
10.1002/(SICI)1096-9918(19960916)24:9<569::AID-SIA170>3.0.CO;2-7
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Surface preparation of aluminium alloy adherends is designed to minimize the influence of organic contaminant on the durability of epoxy adhesive bonds. The organic contaminant molecules have the potential to inhibit the bonding of the adhesive with the surface oxide on the adherend. X-ray photoelectron spectroscopy (XPS) shows that a freshly exposed aluminium surface quickly adsorbs over ten atomic layers of organic contaminant. Models to fit XPS data measured at various specimen take-off angles indicate that this contaminant is not adsorbed uniformly. Experiments show that for mechanically prepared adherends treated with an organosilane coupling agent, the bond durability depends strongly on the contaminant concentration and the time of administration during the preparation sequence. The observed variations in bond durability can be explained in terms of inhomogeneities in the strength of adhesion between the adhesive and the metal oxide.
引用
收藏
页码：569 / 577
页数：9
相关论文
共 50 条
[21]   Functionalized plasma polymer coatings for improved durability of aluminium-epoxy adhesive joints: fractography [J].
Alexander, MR ;
Zhou, X ;
Thompson, GE ;
Duc, TM ;
McAlpine, E ;
Tielsch, BJ .
SURFACE AND INTERFACE ANALYSIS, 2000, 30 (01) :16-20
[22]   Influence of surface preparation on performance of chromate conversion coatings on Alclad 2024 aluminium alloy Part II: EIS investigation [J].
Campestrini, P ;
van Westing, EPM ;
de Wit, JHW .
ELECTROCHIMICA ACTA, 2001, 46 (17) :2631-2647
[23]   Influence of surface preparation on performance of chromate conversion coatings on Alclad 2024 aluminium alloy Part I: Nucleation and growth [J].
Campestrini, P ;
van Westing, EPM ;
de Wit, JHW .
ELECTROCHIMICA ACTA, 2001, 46 (16) :2553-2571
[24]   Interactions of BTESPT silane and maleic anhydride grafted polypropylene with epoxy and application to improve adhesive durability between epoxy and aluminium sheet [J].
Chen, Ming-An ;
Xie, Xuan ;
Zhang, Xin-Ming .
PROGRESS IN ORGANIC COATINGS, 2009, 66 (01) :40-51
[25]   Effect of the thickness of cold sprayed aluminium alloy coating on the adhesive bond strength with an aluminium alloy substrate [J].
Xiong, Yuming ;
Zhuang, Wyman ;
Zhang, Mingxing .
SURFACE & COATINGS TECHNOLOGY, 2015, 270 :259-265
[26]   Ageing of adhesive bonds with various surface treatments, part 3: Aluminium-dicyandiamide cured aluminium filled epoxy joints [J].
Comrie, R ;
Affrossman, S ;
Hayward, D ;
Pethrick, RA ;
Zhou, XR ;
Thompson, GE .
JOURNAL OF ADHESION, 2005, 81 (12) :1199-1215
[27]   The Role of the Surface Pretreatment in the Durability of Aluminium-Alloy Structural Adhesive Joints: Mechanisms of Failure [J].
Bland, David J. ;
Kinloch, Anthony J. ;
Watts, John F. .
JOURNAL OF ADHESION, 2013, 89 (05) :369-397
[28]   Low frequency relaxation effect observed on 2024 aluminium alloy [J].
Rivière, A ;
Pelosin, V .
JOURNAL OF ALLOYS AND COMPOUNDS, 2000, 310 :173-175
[29]   Glass/epoxy composites and aluminium alloy joint using Kevlar® intermediate layer and nanoclay-reinforced epoxy adhesive [J].
Dwivedi, Mayank ;
Gupta, Prem Chand ;
Gaur, Kumresh Kumar ;
Ghosh, Anup K. .
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2013, 27 (23) :2507-2516
[30]   Durability of aluminium alloy adhesive joints in cyclic hydrothermal condition for high-speed EMU applications [J].
Qin, Guofeng ;
Fan, Yisa ;
Na, Jingxin ;
Mu, Wenlong ;
Tan, Wei .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2018, 84 :153-165
12345