Cyclic deformation induced strengthening and unusual rate sensitivity in Cu/Ru nanolayered films

被引:33
作者
Cao, Z. H. [1 ,2 ]
Wei, M. Z. [1 ]
Ma, Y. J. [1 ]
Sun, C. [1 ]
Lu, H. M. [1 ]
Fan, Z. [2 ,3 ]
Meng, X. K. [1 ]
机构
[1] Nanjing Univ, Coll Engn & Appl Sci, Inst Mat Engn, Natl Lab Solid State Microstruct, Nanjing, Jiangsu, Peoples R China
[2] Purdue Univ, Sch Mat Engn, W Lafayette, IN 47907 USA
[3] Texas A&M Univ, Dept Mech Engn, College Stn, TX 77843 USA
基金
中国国家自然科学基金;
关键词
Layered material; Cyclic loading; Rate sensitivity; Strengthening mechanisms; Dislocations; STRAIN-RATE SENSITIVITY; SIZE-DEPENDENT DEFORMATION; SOLID-STATE AMORPHIZATION; PLASTIC-DEFORMATION; MECHANICAL-PROPERTIES; METALLIC MULTILAYERS; TEXTURE EVOLUTION; GRAIN-SIZE; MICROSTRUCTURAL EVOLUTION; CONVENTIONAL THEORY;
D O I
10.1016/j.ijplas.2017.08.005
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In this work, we have systematically investigated the effect of cyclic deformation on the strength and rate sensitivity of Cu/Ru multilayers with different individual layer thickness (h) by nanoindentation tests. It was found that cyclic deformation remarkably enhances the hardness of Cu/Ru multilayers comparing with the specimens by monotonic loading. The rate sensitivity (m) of multilayer exhibits an anomalous size dependence after nano scale cyclic deformation. When h > 10 nm, the m linearly increases with increasing cycle number of loading-unloading (s). However, the m sharply decreases with increasing s when h < 10 nm, presenting an inverse cyclic deformation effect on m. An obvious Bauschinger effect is observed during cyclic loading, where the evolution of effective stress is consistent with the m. Cyclic deformation induced dislocation accumulation and arrays at the heterogeneous interface are the intrinsic plastic mechanism for the enhanced rate sensitivity. The formation of amorphous layers at the critical his mainly responsible for the inverse size m. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码:43 / 57
页数:15
相关论文
共 73 条
[1]   Multiscale modeling and simulation of deformation in nanoscale metallic multilayer systems [J].
Abdolrahim, Niaz ;
Zbib, Hussein M. ;
Bahr, David F. .
INTERNATIONAL JOURNAL OF PLASTICITY, 2014, 52 :33-50
[2]   Dislocation dynamics analysis of dislocation intersections in nanoscale metallic multilayered composites [J].
Akasheh, F. ;
Zbib, H. M. ;
Hirth, J. P. ;
Hoagland, R. G. ;
Misra, A. .
JOURNAL OF APPLIED PHYSICS, 2007, 101 (08)
[3]   Interactions between glide dislocations and parallel interfacial dislocations in nanoscale strained layers [J].
Akasheh, F. ;
Zbib, H. M. ;
Hirth, J. P. ;
Hoagland, R. G. ;
Misra, A. .
JOURNAL OF APPLIED PHYSICS, 2007, 102 (03)
[4]   Dislocation-based deformation mechanisms in metallic nanolaminates [J].
Anderson, PM ;
Foecke, T ;
Hazzledine, PM .
MRS BULLETIN, 1999, 24 (02) :27-33
[5]   Flow stress/strain rate/grain size coupling for fcc nanopolycrystals [J].
Armstrong, R. W. ;
Rodriguez, P. .
PHILOSOPHICAL MAGAZINE, 2006, 86 (36) :5787-5796
[6]   Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density [J].
Arsenlis, A ;
Parks, DM .
ACTA MATERIALIA, 1999, 47 (05) :1597-1611
[7]   Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins [J].
Asaro, RJ ;
Suresh, S .
ACTA MATERIALIA, 2005, 53 (12) :3369-3382
[8]   Mechanics of very fine-grained nanocrystalline materials with contributions from grain interior, GB zone, and grain-boundary sliding [J].
Barai, Pallab ;
Weng, George J. .
INTERNATIONAL JOURNAL OF PLASTICITY, 2009, 25 (12) :2410-2434
[9]   Defect-interface interactions [J].
Beyerlein, I. J. ;
Demkowicz, M. J. ;
Misra, A. ;
Uberuaga, B. P. .
PROGRESS IN MATERIALS SCIENCE, 2015, 74 :125-210
[10]   On the strain rate sensitivity of plastic flow in metallic glasses [J].
Bhattacharyya, Abir ;
Singh, Gaurav ;
Prasad, K. Eswar ;
Narasimhan, R. ;
Ramamurty, U. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 625 :245-251