Experimental Study on Solidification of Pb2+ in Fly Ash-Based Geopolymers

被引:10
作者
Liu, Fang [1 ]
Tang, Ran [1 ]
Wang, Baomin [2 ]
Yuan, Xiaosa [1 ]
机构
[1] Xijing Univ, Shaanxi Key Lab Safety & Durabil Concrete Struct, Xian 710123, Peoples R China
[2] Dalian Univ Technol, Sch Civil Engn, Dalian 116023, Peoples R China
基金
中国国家自然科学基金;
关键词
fly ash; geopolymer; solidification; heavy metal; leaching concentration; HEAVY-METALS; STABILIZATION/SOLIDIFICATION; IMMOBILIZATION;
D O I
10.3390/su132212621
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Fly ash from the incineration of domestic waste contains heavy metals, which is harmful to the environment. To reduce and prevent their contamination, heavy metal ions need to be sequestered. In this study, the geopolymer prepared by fly ash, a kind of power plant waste, is used to cure the heavy metal Pb2+, and to investigate the effect of different concentrations of Pb2+ on the compressive strength of the solidified body at different ages; the curing effect is judged by the toxic leaching concentration of heavy metals; the resistance of the solidified body to immersion is evaluated by comparing the change in strength before and after leaching; the fly ash-based geopolymer solidified body is compared with the cement solidified body in terms of curing effectiveness; the properties of the geopolymer and its mechanism of curing heavy metals are explored by microscopic tests. The results show that the fly ash-based geopolymer solidified body has good resistance to immersion; the optimum curing concentration of Pb2+ in fly ash-based geopolymers is 2.0%; compared to pure geopolymers, the strength of the solidified body at 28 d decreases by only 13.0%, and the leaching concentration of Pb2+ is 4.73 mg & BULL;L-1, which meets the specification requirements; the curing effect of the fly ash-based geopolymer is better than the cement solidified body; the microscopic test results indicate that the curing of Pb2+ by the fly ash-based geopolymer is a combination of both chemical bonding and physical fixation.
引用
收藏
页数:12
相关论文
共 20 条
[1]   Coal fly ash as raw material for the manufacture of geopolymer-based products [J].
Andini, S. ;
Cioffi, R. ;
Colangelo, F. ;
Grieco, T. ;
Montagnaro, F. ;
Santoro, L. .
WASTE MANAGEMENT, 2008, 28 (02) :416-423
[2]   Using inorganic polymer to reduce leach rates of metals from brown coal fly ash [J].
Bankowski, P ;
Zou, L ;
Hodges, R .
MINERALS ENGINEERING, 2004, 17 (02) :159-166
[3]   Characteristics of municipal solid waste incineration fly ash with cement solidification treatment [J].
Bie, Rushan ;
Chen, Pei ;
Song, Xingfei ;
Ji, Xiaoyu .
JOURNAL OF THE ENERGY INSTITUTE, 2016, 89 (04) :704-712
[4]   The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers [J].
Duxson, P. ;
Mallicoat, S. W. ;
Lukey, G. C. ;
Kriven, W. M. ;
van Deventer, J. S. J. .
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2007, 292 (01) :8-20
[5]   Stabilization/solidification of heavy metals in kaolin/zeolite based geopolymers [J].
El-Eswed, B. I. ;
Yousef, R. I. ;
Alshaaer, M. ;
Hamadneh, I. ;
Al-Gharabli, S. I. ;
Khalili, F. .
INTERNATIONAL JOURNAL OF MINERAL PROCESSING, 2015, 137 :34-42
[6]   Compressive strength and microstructural characteristics of class C fly ash geopolymer [J].
Guo, Xiaolu ;
Shi, Huisheng ;
Dick, Warren A. .
CEMENT & CONCRETE COMPOSITES, 2010, 32 (02) :142-147
[7]   Chemical stability of geopolymers containing municipal solid waste incinerator fly ash [J].
Lancellotti, Isabella ;
Kamseu, Elie ;
Michelazzi, Marco ;
Barbieri, Luisa ;
Corradi, Anna ;
Leonelli, Cristina .
WASTE MANAGEMENT, 2010, 30 (04) :673-679
[8]  
Liu X., 2014, ENG CONSTR, V46, P56
[9]   Mechanical properties of sodium and potassium activated metakaolin-based geopolymers [J].
Lizcano, Maricela ;
Kim, Hyun Soo ;
Basu, Sandip ;
Radovic, Miladin .
JOURNAL OF MATERIALS SCIENCE, 2012, 47 (06) :2607-2616
[10]   Stabilization/solidification of a municipal solid waste incineration residue using fly ash-based geopolymers [J].
Luna Galiano, Y. ;
Fernandez Pereira, C. ;
Vale, J. .
JOURNAL OF HAZARDOUS MATERIALS, 2011, 185 (01) :373-381