Study on self-loosening of bolted joints excited by dynamic axial load

被引：74

作者：

Liu, Jianhua ^{[1
]}

Ouyang, Huajiang ^{[2
]}

Feng, Zhiqiang ^{[3
]}

Cai, Zhenbing ^{[1
]}

Liu, Xuetong ^{[1
]}

Zhu, Minhao ^{[1
]}

机构：

[1] Southwest Jiaotong Univ, Tribol Res Inst, Chengdu 610031, Sichuan, Peoples R China

[2] Univ Liverpool, Sch Engn, Liverpool L69 3GH, Merseyside, England

[3] Univ Evry Val dEssonne, LMEE, Evry, France

来源：

TRIBOLOGY INTERNATIONAL | 2017年 / 115卷

基金：

中国国家自然科学基金;

关键词：

Bolted joints; Loosening; Fretting wear; Frictional energy dissipation; FINITE-ELEMENT-ANALYSIS; FRICTION COEFFICIENT; THREADED COMPONENTS; HARMONIC VIBRATION; WEAR; PERFORMANCE; MECHANISM; CONTACT; MODEL; TESTS;

D O I：

10.1016/j.triboint.2017.05.037

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Loosening tests of bolted joints are carried out under various preloads and excitation amplitudes. Three coatings are utilized to treat bolts, and their effects on the anti-loosening performance are studied. For the MoS2 coated bolt, a reasonable preload is calculated, and its anti-loosening performance is also examined. It is found that the anti-loosening performance of MoS2 coating on bolt is better than that of the other two coatings. Under the same equivalent stress as that of the uncoated bolt at the thread root, both the preload and the anti-loosening performance of the MoS2 coated bolt are significantly greater. Additionally, a FE model is created to simulate the bolted joint, and very good agreement is found between numerical and experimental results.

引用

页码：432 / 451

页数：20

共 50 条

[41] Self-loosening model for bolted assemblies under transverse stresses
Aziz, H
Combes, B
Lavabre, R
RECENT ADVANCES IN INTEGRATED DESIGN AND MANUFACTURING IN MECHANICAL ENGINEERING, 2003, : 149 - 158
[42] AVOIDING OF SELF-LOOSENING IN COMPONENTS WITH MULTIPLE SCREW JOINTS
Guggolz, D.
Manoharan, S. K.
Friedrich, C.
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2015, VOL 2B, 2016,
[43] Self-loosening Process Simulation of Bolted Joints in 12kV Vacuum Circuit Breakers under Vibration
Liu, Guangwei
Wang, Lijun
Jia, Shenli
Yang, Ren
2017 4TH INTERNATIONAL CONFERENCE ON ELECTRIC POWER EQUIPMENT-SWITCHING TECHNOLOGY (ICEPE-ST), 2017, : 668 - 672
[44] Method of accumulation of preload loss of bolted joints due to rotational self-loosening caused by cyclic, transversal excitation
Hofmann, Marius
Fass, Markus
Eberhard, Andrea
Klein, Marcus
Baumgartner, Joerg
Oechsner, Matthias
Melz, Tobias
ENGINEERING FAILURE ANALYSIS, 2024, 162
[45] Investigation into the self-loosening behavior of bolted joint subjected to rotational loading
Yokoyama, Takashi
Olsson, Marten
Izumi, Satoshi
Sakai, Shinsuke
ENGINEERING FAILURE ANALYSIS, 2012, 23 : 35 - 43
[46] Investigation into the Self-loosening Trend of Bolt Joints on the Tower Crane
Wang, ShengChun
Ni, PeiWei
Zhang, Ye
Dong, MingXiao
PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND INDUSTRIAL INFORMATICS (AMEII 2016), 2016, 73 : 1087 - 1095
[47] Experimental investigation on self-loosening of a bolted joint under cyclical temperature changes
Eraliev, Oybek Maripjon Ugli
Zhang, Yi-He
Lee, Kwang-Hee
Lee, Chul-Hee
ADVANCES IN MECHANICAL ENGINEERING, 2021, 13 (08)
[48] Critical load determination for preventing rotational loosening in bolted joints under dynamic transverse loads
Zhang, Jingdong
Li, Weihao
Feng, Jiaming
Liao, Ridong
ENGINEERING FAILURE ANALYSIS, 2024, 160
[49] SELF-LOOSENING MECHANISM OF NUTS DUE TO CYCLIC THERMAL LOAD
Shoji, Yasumasa
Sawa, Toshiyuki
ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2009, VOL 2, 2010, : 99 - 105
[50] Simplified Analysis of the Early Stage Self-loosening of a Shear-Loaded Bolted Joint
Rafik, Vincent
Daidie, Alain
Combes, Bertrand
Chirol, Clement
PROCEEDINGS OF THE SECOND INTERNATIONAL CONFERENCE ON THEORETICAL, APPLIED AND EXPERIMENTAL MECHANICS, 2019, 8 : 169 - 175

← 1 2 3 4 5 →