Multiaxial low-cycle thermo-mechanical fatigue of a low-alloy martensitic steel: Cyclic mechanical behaviour, damage mechanisms and life prediction

被引:31
作者
Bartosak, Michal [1 ]
Horvath, Jakub [2 ]
Spaniel, Miroslav [1 ]
机构
[1] Czech Tech Univ, Ctr Adv Aerosp Technol, Fac Mech Engn, Dept Mech Biomech & Mechatron, Tech St 4, Prague 16607, Czech Republic
[2] Czech Tech Univ, Ctr Adv Aerosp Technol, Fac Mech Engn, Dept Mat Engn, Charles Sq 13, Prague 12135, Czech Republic
关键词
Low-cycle fatigue; Thermo-mechanical fatigue; Life prediction; Non-proportional loading; Critical plane approach; HIGH-TEMPERATURE; CREEP-FATIGUE; HOLD TIME; SUPERALLOY; OXIDATION; FREQUENCY; PARAMETER; TENSILE; MODEL; LCF;
D O I
10.1016/j.ijfatigue.2021.106383
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Axial-torsional Low-Cycle Fatigue tests (LCF) and Thermo-Mechanical Fatigue tests (TMF) were performed on a low-alloy martensitic steel for temperatures between 300 degrees C and 600 degrees C, as both proportional and nonproportional. The results show that non-proportional loading leads to an increase in fatigue damage and to a decrease in the observed lifetime. The TMF damage model is proposed here in order to incorporate the effects of multiaxial loading and varying temperatures. This damage model is based on a critical plane approach, and it incorporates the fatigue, oxidation and creep forms of damage. Finally, the proposed model is validated for a large experimental database.
引用
收藏
页数:14
相关论文
共 64 条
[61]   A comparative study of low cycle fatigue behavior and microstructure of Cr-based steel at room and high temperatures [J].
Wang, Quanyi ;
Wang, Qingyuan ;
Gong, Xiufang ;
Wang, Tianjian ;
Zhang, Wei ;
Li, Lang ;
Liu, Yongjie ;
He, Chao ;
Wang, Chong ;
Zhang, Hong .
MATERIALS & DESIGN, 2020, 195
[62]   An empirical non-proportional cyclic plasticity approach under multiaxial low-cycle fatigue loading [J].
Wu, Hao .
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2018, 142 :66-73
[63]   Low cycle fatigue of 2.25Cr1Mo steel with tensile and compressed hold loading at elevated temperature [J].
Zhang, Junfeng ;
Yu, Dunji ;
Zhao, Zizhen ;
Zhang, Zhe ;
Chen, Gang ;
Chen, Xu .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 667 :251-260
[64]   Interaction of cyclic softening and stress relaxation of 9-12% Cr steel under strain-controlled fatigue-creep condition: Experimental and modeling [J].
Zhang, Shang-Lin ;
Xuan, Fu-Zhen .
INTERNATIONAL JOURNAL OF PLASTICITY, 2017, 98 :45-64