Experimental nanoindentation of BCC metals

被引：46

作者：

Voyiadjis, George Z. ^{[1
]}

Almasri, Amin H. ^{[2
]}

Park, Taehyo ^{[3
]}

机构：

[1] Louisiana State Univ, Dept Civil & Environm Engn, Baton Rouge, LA 70803 USA

[2] Jordan Univ Sci & Technol, Dept Civil Engn, Irbid 22110, Jordan

[3] Hanyang Univ, Dept Civil Engn, Seoul 133791, South Korea

来源：

MECHANICS RESEARCH COMMUNICATIONS | 2010年 / 37卷 / 03期

关键词：

BCC metals; Nano-indentation; Hardness; GRADIENT PLASTICITY THEORY; LENGTH SCALE; SPHERICAL INDENTATION; MICRO-INDENTATION; FCC METALS; HARDNESS; SIZE; MICROINDENTATION; DEPTH; MODEL;

D O I：

10.1016/j.mechrescom.2010.02.001

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Indentation size effect has been noticed in micro and nano scales. An experimental study for nano-indentation size effects is presented in this paper for different body centered cubic (BCC) metals. The selected materials are: Iron, Molybdenum, Tungsten, and Tantalum. Nano-indentation tests are conducted using a Berkovich indenter with continuous stiffness measurement (CSM) procedure, where hardness is measured continuously with indentation depth. The results generally show three distinctive regions for the hardness measurement versus indentation depth for the material. Hardness is noticed to decrease with increasing indentation in two regions; at very low and at very high indentations. On the other hand, hardness increases with indentation in a region that lies between the two aforementioned regions. This behavior is successfully simulated through a power law model, which includes the effect of grain boundaries as well as the strain gradient mechanism. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：307 / 314

页数：8

共 49 条

[1] A consistent modified Zerilli-Armstrong flow stress model for BCC and FCC metals for elevated temperatures [J].

Abed, FH ;

Voyiadjis, GZ .

ACTA MECHANICA, 2005, 175 (1-4) :1-18

[2] Analytical and experimental determination of the material intrinsic length scale of strain gradient plasticity theory from micro- and nano-indentation experiments [J].

Abu Al-Rub, RK ;

Voyiadjis, GZ .

INTERNATIONAL JOURNAL OF PLASTICITY, 2004, 20 (06) :1139-1182

[3] Physically based constitutive model for body centered cubic metals with applications to iron [J].

Almasri, Amin ;

Voyiadjis, George Z. .

JOURNAL OF ENGINEERING MECHANICS, 2008, 134 (07) :521-529

[4] Nano-indentation in FCC metals: experimental study [J].

Almasri, Amin H. ;

Voyiadjis, George Z. .

ACTA MECHANICA, 2010, 209 (1-2) :1-9

[5] On modeling the micro-indentation response of an amorphous polymer [J].

Anand, L ;

Ames, NM .

INTERNATIONAL JOURNAL OF PLASTICITY, 2006, 22 (06) :1123-1170

[6] MICROHARDNESS OF SN-DOPED INP [J].

ASCHERON, C ;

HAASE, C ;

KUHN, G ;

NEUMANN, H .

CRYSTAL RESEARCH AND TECHNOLOGY, 1989, 24 (02) :K33-K35

[7] A model for rate-dependent flow of metal polycrystals based on the slip plane lattice incompatibility [J].

Beaudoin, AJ ;

Acharya, A .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 309 :411-415

[8] Evaluation of the stress-strain curve of metallic materials by spherical indentation [J].

Beghini, M ;

Bertini, L ;

Fontanari, V .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2006, 43 (7-8) :2441-2459

[9] Spherical indentation into elastoplastic materials: Indentation-response based definitions of the representative strain [J].

Cao, Yanping ;

Qian, Xiuqing ;

Huber, Norbert .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 454 (1-13) :1-13

[10] Strain gradient plasticity effect in indentation hardness of polymers [J].

Chong, ACM ;

Lam, DCC .

JOURNAL OF MATERIALS RESEARCH, 1999, 14 (10) :4103-4110

← 1 2 3 4 5 →