Study of the electrical conductivity of biobased carbonaceous powder materials under moderate pressure for the application as electrode materials in energy storage technologies

被引:38
作者
Hoffmann, Viola [1 ]
Correa, Catalina Rodriguez [1 ]
Sautter, Dennis [1 ]
Maringolo, Emilio [1 ]
Kruse, Andrea [1 ]
机构
[1] Univ Hohenheim, Inst Agr Engn, Dept Convers Technol Biobased Resources, Garbenstr 9, D-70599 Stuttgart, Germany
来源
GLOBAL CHANGE BIOLOGY BIOENERGY | 2019年 / 11卷 / 01期
关键词
biobased materials; bioeconomy; biomass carbonization; carbon materials; carbonaceous powders; electrical conductivity; electrochemical double-layer capacitor (EDLC); energy storage; nanocomposites; ACTIVATED CARBON; BLACKS; OXIDE; SUPERCAPACITORS; PERFORMANCE; PYROLYSIS;
D O I
10.1111/gcbb.12545
中图分类号
S3 [农学(农艺学)];
学科分类号
0901 ;
摘要
This study focusses on the assessment of the electrical conductivity (EC) of biobased electrode materials for the application in energy storage devices and presents a simple and reproducible method to measure the EC of carbonaceous powders under moderate pressure (10-50 N). Based on the pyrolysis of corncob at three different temperatures (600, 800, and 900 degrees C) and further treatments of the biochar obtained at 600 degrees C, 11 different carbonaceous powder materials were produced including biochars, activated carbons, and composites. Composite materials were obtained by adding either metal oxide (RuO2 or Fe3O4) in different proportions or additives which are commonly used in electrode production (5 wt% binder and 15 wt% conductive additive). Furthermore, one physically activated commercial AC based on peat with a known EC of 33 S/m was treated with additives and used as a reference. For all materials, an increase of applied pressure resulted in higher EC values due to closer particle contact. The comparison of two methods (with and without preload) showed that a prepelletization of the samples is not necessary to obtain reliable results. By analyzing the obtained EC values while taking mechanical and physicochemical properties into account, it could be shown that a high carbonization temperature and high specific surface area favor the increase of EC. Furthermore, certain proportions of metal oxides lead to an improvement of EC (40 wt% RuO2, 10 wt% Fe3O4), while the treatment with additives leads to a decrease of EC. The EC values among all samples varied between 0.8 S/m (biochar) and 408 S/m (AC/RuO2 composite) at the highest pressure level (637 kPa). Thus, promising biobased electrode materials for environmentally friendly energy storage technologies are presented with the aim of contributing to the establishment of a biobased resource and product platform for bioeconomy.
引用
收藏
页码:230 / 248
页数:19
相关论文
共 57 条
  • [41] Tuning Carbon Materials for Supercapacitors by Direct Pyrolysis of Seaweeds
    Raymundo-Pinero, Encarnacion
    Cadek, Martin
    Beguin, Francois
    [J]. ADVANCED FUNCTIONAL MATERIALS, 2009, 19 (07) : 1032 - 1039
  • [42] Electrical conductivity of carbon blacks under compression
    Sánchez-González, J
    Macías-García, A
    Alexandre-Franco, MF
    Gómez-Serrano, V
    [J]. CARBON, 2005, 43 (04) : 741 - 747
  • [43] The role of the electric conductivity of carbons in the electrochemical capacitor performance
    Sanchez-Gonzalez, Jose
    Stoeckli, Fritz
    Centeno, Teresa A.
    [J]. JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 2011, 657 (1-2) : 176 - 180
  • [44] A review on electrochemical double-layer capacitors
    Sharma, Pawan
    Bhatti, T. S.
    [J]. ENERGY CONVERSION AND MANAGEMENT, 2010, 51 (12) : 2901 - 2912
  • [45] Characterisation and evaluation of biochars for their application as a soil amendment
    Singh, Balwant
    Singh, Bhupinder Pal
    Cowie, Annette L.
    [J]. AUSTRALIAN JOURNAL OF SOIL RESEARCH, 2010, 48 (6-7): : 516 - 525
  • [46] Soltex, 2018, AC BLACK 01
  • [47] Steeves M. M., 2011, THESIS, V262, P187
  • [48] Su Y., 2007, NEW CARBON MATER, V22, P4
  • [49] Thrower P. A., 1997, MAT SCI TECHNOLOGY, V25, DOI [10. 1179/026708397790302007, DOI 10.1179/026708397790302007]
  • [50] Wang C M., 2015, The Proceedings of the Second International Conference on Industrial Application Engineering, P439