A study on the correlation between electrochemical corrosion and chemical mechanical polishing performance of W and Ti film

被引：11

作者：

Seo, Yong-Jin ^{[1
]}

机构：

[1] Daebul Univ, Dept Elect Engn, Youngam Kum 526702, Chonnam Do, South Korea

来源：

MICROELECTRONIC ENGINEERING | 2007年 / 84卷 / 12期

关键词：

chemical mechanical polishing; polishing selectivity; potentiodynamic polarization; electrochemical corrosion; removal rate; END-POINT DETECTION; CMP PROCESS; SELECTIVITY; TUNGSTEN; PLANARIZATION; ALUMINUM; BEHAVIOR;

D O I：

10.1016/j.mee.2006.09.003

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

In this paper, in order to investigate the electrochemical polishing behavior of the tungsten (W) and titanium (Ti) film, the chemical mechanical polishing (CMP) performances of W and Ti film according to the oxidizer contents were studied through electrochemical corrosion analysis. The alumina (Al2O3)-based tungsten slurry with H2O2 oxidizer was used for CMP test. As an experimental result, for the case of 5 vol% oxidizer added, the removal rates were improved and a good polishing selectivity of 1.4: 1 was obtained. It means that the oxidizer with the highest removal rate (RR) has a high dissolution rate due to the predominant electrochemical corrosion effects. Therefore we conclude that the W and Ti-CMP characteristics are strongly dependent on the amounts of H2O2 oxidizer additive. 2006 Elsevier B.V.. All rights reserved.

引用

页码：2769 / 2774

页数：6

共 12 条

[1] Role of oxidizer in the chemical mechanical planarization of the Ti/TiN barrier layer [J].

Chathapuram, VS ;

Du, T ;

Sundaram, KB ;

Desai, V .

MICROELECTRONIC ENGINEERING, 2003, 65 (04) :478-488

[2] W CMP process integration: Consumables evaluation - electrical results and end point detection [J].

Fayolle, M ;

Sicurani, E ;

Morand, Y .

MICROELECTRONIC ENGINEERING, 1997, 37-8 (1-4) :347-352

[3] Effect of oxide and W-CMP on the material properties and electromigration behaviour of layered aluminum metallisations [J].

Heyvaert, I ;

Van Hove, M ;

Witvrouw, A ;

Maex, K ;

Saerens, A ;

Roussel, P ;

Bender, H .

MICROELECTRONIC ENGINEERING, 2000, 50 (1-4) :291-299

[4] The removal selectivity of titanium and aluminum in chemical mechanical planarization [J].

Hsu, JW ;

Chiu, SY ;

Wang, YL ;

Dai, BT ;

Tsai, MS ;

Feng, MS ;

Shih, HC .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2002, 149 (03) :G204-G208

[5] CHEMICAL-MECHANICAL POLISHING FOR FABRICATING PATTERNED W METAL FEATURES AS CHIP INTERCONNECTS [J].

KAUFMAN, FB ;

THOMPSON, DB ;

BROADIE, RE ;

JASO, MA ;

GUTHRIE, WL ;

PEARSON, DJ ;

SMALL, MB .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1991, 138 (11) :3460-3465

[6] In-situ end point detection of the STI-CMP process using a high selectivity slurry [J].

Kim, SY ;

Lee, KJ ;

Seo, YJ .

MICROELECTRONIC ENGINEERING, 2003, 66 (1-4) :463-471

[7] Application of a CMP model to tungsten CMP [J].

Paul, E .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2001, 148 (06) :G359-G363

[8] Electrochemical corrosion effects and chemical mechanical polishing characteristics of tungsten film using mixed oxidizers [J].

Seo, YJ ;

Kim, NH ;

Lee, WS .

MICROELECTRONIC ENGINEERING, 2006, 83 (03) :428-433

[9] Effects of oxidant additives for exact selectivity control of W- and Ti-CMP process [J].

Seo, YJ ;

Lee, WS .

MICROELECTRONIC ENGINEERING, 2005, 77 (02) :132-138

[10]

Steigerwald J.M., 1997, CHEM MECH PLANARIZAT

← 1 2 →