Multi-Robot 2.5D Localization and Mapping Using a Monte Carlo Algorithm on a Multi-Level Surface

Most indoor environments have wheelchair adaptations or ramps, providing an opportunity for mobile robots to navigate sloped areas avoiding steps. These indoor environments with integrated sloped areas are divided into different levels. The multi-level areas represent a challenge for mobile robot navigation due to the sudden change in reference sensors as visual, inertial, or laser scan instruments. Using multiple cooperative robots is advantageous for mapping and localization since they permit rapid exploration of the environment and provide higher redundancy than using a single robot. This study proposes a multi-robot localization using two robots (leader and follower) to perform a fast and robust environment exploration on multi-level areas. The leader robot is equipped with a 3D LIDAR for 2.5D mapping and a Kinect camera for RGB image acquisition. Using 3D LIDAR, the leader robot obtains information for particle localization, with particles sampled from the walls and obstacle tangents. We employ a convolutional neural network on the RGB images for multi-level area detection. Once the leader robot detects a multi-level area, it generates a path and sends a notification to the follower robot to go into the detected location. The follower robot utilizes a 2D LIDAR to explore the boundaries of the even areas and generate a 2D map using an extension of the iterative closest point. The 2D map is utilized as a re-localization resource in case of failure of the leader robot.