A Review on CNT Reinforced Aluminium and Magnesium Matrix Composites

被引：20
作者：
Ramnath, B. Vijaya [1 ]
Parswajinan, C. [2 ]
Elanchezhian, C. [1 ]
Pragadeesh, S. V. [1 ]
Ramkishore, P. R. [1 ]
Sabarish, V. [1 ]
机构：
[1] Sri Sai Ram Engn Coll, Dept Mech Engn, Madras 600044, Tamil Nadu, India
[2] SCSVMV Univ, Dept Mech Engn, Res Scholar, Kancheepuram, Tamil Nadu, India
来源：
ADVANCED MANUFACTURING RESEARCH AND INTELLIGENT APPLICATIONS | 2014年 / 591卷
关键词：
Carbon Nanotubes (CNT); Aluminium; Magnesium; Metal Matrix Composites; MECHANICAL-PROPERTIES; CARBON NANOTUBES; MILLING TIME; FRICTION;
D O I：
10.4028/www.scientific.net/AMM.591.120
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Carbon Nanotubes (CNT) are one allotropic form of carbon, which have some unique characteristics that make them a suitable reinforcing agent in various types of composites. CNT reinforced composites are gaining more attention in recent days. Reinforcing with CNT leads to increase in strength without considerable increase in weight. Many metal matrix composites (MMCs) with base metals like aluminium, magnesium, copper, nickel etc., and polymer matrix composites (PMCs) have been fabricated and experimented with CNT as one of their reinforcing agents and corresponding results have been recorded. This paper reviews a few of these recordings on Al and Mg MMCs and also some future development in this field.
引用
收藏
页码：120 / +
页数：3
相关论文
共 14 条
[1]   Carbon nanotube reinforced metal matrix composites - a review [J].
Bakshi, S. R. ;
Lahiri, D. ;
Agarwal, A. .
INTERNATIONAL MATERIALS REVIEWS, 2010, 55 (01) :41-64
[2]   Hardness of Multi Wall Carbon Nanotubes reinforced aluminium matrix composites [J].
Bradbury, Christopher R. ;
Gomon, Jaana-Kateriina ;
Kollo, Lauri ;
Kwon, Hansang ;
Leparoux, Marc .
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 585 :362-367
[3]   Deformation behavior of Al-Si alloy based nanocomposites reinforced with carbon nanotubes [J].
Choi, H. J. ;
Shin, J. H. ;
Min, B. H. ;
Bae, D. H. .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2010, 41 (02) :327-329
[4]   Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites [J].
Esawi, A. M. K. ;
Morsi, K. ;
Sayed, A. ;
Tahera, M. ;
Lanka, S. .
COMPOSITES SCIENCE AND TECHNOLOGY, 2010, 70 (16) :2237-2241
[5]   Carbon nanotube-reinforced aluminium strips [J].
Esawi, Amal M. K. ;
El Borady, Mostafa A. .
COMPOSITES SCIENCE AND TECHNOLOGY, 2008, 68 (02) :486-492
[6]   Interfacial analysis between Mg matrix and carbon nanotubes in Mg-6 wt.% Al alloy matrix composites reinforced with carbon nanotubes [J].
Fukuda, Hiroyuki ;
Kondoh, Katsuyoshi ;
Umeda, Junko ;
Fugetsu, Bunshi .
COMPOSITES SCIENCE AND TECHNOLOGY, 2011, 71 (05) :705-709
[7]   HELICAL MICROTUBULES OF GRAPHITIC CARBON [J].
IIJIMA, S .
NATURE, 1991, 354 (6348) :56-58
[8]   Friction and wear characteristics of the carbon nanotube-aluminum composites with different manufacturing conditions [J].
Kim, Il-Young ;
Lee, Jung-Hee ;
Lee, Gyu-Sun ;
Baik, Seung-Hyun ;
Kim, Young-Jig ;
Lee, Young-Ze .
WEAR, 2009, 267 (1-4) :593-598
[9]   Effect of milling time on dual-nanoparticulate-reinforced aluminum alloy matrix composite materials [J].
Kwon, Hansang ;
Saarna, Mart ;
Yoon, Songhak ;
Weidenkaff, Anke ;
Leparoux, Marc .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 590 :338-345
[10]   Effect of ball-milling time on mechanical properties of carbon nanotubes reinforced aluminum matrix composites [J].
Liu, Z. Y. ;
Xu, S. J. ;
Xiao, B. L. ;
Xue, P. ;
Wang, W. G. ;
Ma, Z. Y. .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2012, 43 (12) :2161-2168
12