Studies on nanocrystalline TiN coatings prepared by reactive plasma spraying

被引：17

作者：

Dong Yanchun ^{[1
]}

Yan Dianran ^{[1
]}

He Jining ^{[1
]}

Zhang Jianxin ^{[1
]}

Xiao Lisong ^{[1
]}

Li Xiangzhi ^{[1
]}

机构：

[1] Hebei Univ Technol, Sch Mat Sci & Engn, Tianjin 300130, Peoples R China

来源：

JOURNAL OF NANOMATERIALS | 2008年 / 2008卷

关键词：

D O I：

10.1155/2008/690951

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Titanium nitride (TiN) coatings with nanostructure were prepared on the surface of 45 steel (Fe-0.45%C) via reactive plasma spraying (denoted as RPS) Ti powders using spraying gun with self-made reactive chamber. The microstructural characterization, phases constitute, grain size, microhardness, and wear resistance of TiN coatings were systematically investigated. The grain size was obtained through calculation using the Scherrer formula and observed by TEM. The results of X-ray diffraction and electron diffraction indicated that the TiN is main phase of the TiN coating. The forming mechanism of the nano-TiN was characterized by analyzing the SEM morphologies of surface of TiN coating and TiN drops sprayed on the surface of glass, and observing the temperature and velocity of plasma jet using Spray Watch. The tribological properties of the coating under nonlubricated condition were tested and compared with those of the AISI M2 high-speed steel and Al2O3 coating. The results have shown that the RPS TiN coating presents better wear resistance than the M2 high-speed steel and Al2O3 coating under nonlubricated condition. The microhardness of the cross-section and longitudinal section of the TiN coating was tested. The highest hardness of the cross-section of TiN coating is 1735.43HV(100g). Copyright (C) 2008 Dong Yanchun et al.

引用

页数：8

共 24 条

[11]

Jiwen L., 1998, CHINESE J MECH ENG, V11, P136

[12] Characterization of TiN films prepared by rf sputtering using metal and compound targets [J].

Kawamura, M ;

Kumagai, K ;

Abe, Y ;

Sasaki, K ;

Yanagisawa, H .

VACUUM, 1998, 51 (03) :377-380

[13]

Kobayashi A., 1990, Welding International, V4, P276, DOI 10.1080/09507119009447723

[14] Formation of TiN coatings by gas tunnel type plasma reactive spraying [J].

Kobayashi, A .

SURFACE & COATINGS TECHNOLOGY, 2000, 132 (2-3) :152-157

[15] Mechanical properties of bulk sintered titanium nitride ceramics [J].

Kuwahara, H ;

Mazaki, N ;

Takahashi, M ;

Watanabe, T ;

Yang, X ;

Aizawa, T .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 319 :687-691

[16] Microstructure and nanoindentation hardness of Ti/TiN multilayered films [J].

Li, TS ;

Li, H ;

Pan, F .

SURFACE & COATINGS TECHNOLOGY, 2001, 137 (2-3) :225-229

[17] In situ high temperature microscopy study of the surface oxidation and phase transformations in titanium alloys [J].

Malinov, S ;

Sha, W ;

Voon, CS .

JOURNAL OF MICROSCOPY-OXFORD, 2002, 207 (03) :163-168

[18] Simultaneous synthesis and densification of titanium nitride by high pressure combustion synthesis [J].

Marin-Ayral, RM ;

Pascal, C ;

Martinez, F ;

Tedenac, JC .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2000, 20 (14-15) :2679-2684

[19] TiN-CVD process optimization for integration with Cu-CVD [J].

Motte, P ;

Proust, M ;

Torres, J ;

Gobil, Y ;

Morand, Y ;

Palleau, J ;

Pantel, R ;

Juhel, M .

MICROELECTRONIC ENGINEERING, 2000, 50 (1-4) :369-374

[20] THE WEAR AND EROSION RESISTANCE OF HARD PVD COATINGS [J].

RICKERBY, DS ;

BURNETT, PJ .

SURFACE & COATINGS TECHNOLOGY, 1987, 33 (1-4) :191-211

← 1 2 3 →