GMAW dissimilar welding of AISI 409 ferritic stainless steel to AISI 316L austenitic stainless steel by using AISI 308 filler wire

被引：49

作者：

Ghosh, Nabendu ^{[1
]}

Pal, Pradip Kumar ^{[1
]}

Nandi, Goutam ^{[1
]}

机构：

[1] Jadavpur Univ, Mech Engn Dept, Kolkata 700032, WB, India

来源：

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH | 2017年 / 20卷 / 04期

关键词：

MIG welding; Taguchi desirability analyses; Tensile test; Optimization; TAGUCHI METHOD; PARAMETRIC OPTIMIZATION; MECHANICAL-PROPERTIES; PULSED CURRENT; BEAD GEOMETRY; JOINTS;

D O I：

10.1016/j.jestch.2017.08.002

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

To study and analyze the effects of welding parameters: welding current, gas flow rate and nozzle to plate distance, on ultimate tensile strength (UTS) and Yield Strength (YS) in MIG welding of AISI409 ferritic stainless steel to AISI 316L Austenitic Stainless Steel materials. Experiments have been conducted as per L9 orthogonal array of Taguchi method. The observed data of UTS and YS have been interpreted, discussed and analyzed with use of Taguchi Desirability analyses. (C) 2017 Karabuk University. Publishing services by Elsevier B.V. This is an open access article under the CC BY-NC-ND license

引用

页码：1334 / 1341

页数：8

共 41 条

[1] Experimental Study of Cold-Formed Ferritic Stainless Steel Hollow Sections [J].