Study on microstructure and mechanical properties of spark plasma sintered Alumix 431 powder

被引：9

作者：

Garbiec, D. ^{[1
]}

Siwak, P. ^{[2
]}

机构：

[1] Metal Forming Inst, 14 Jana Pawla II St, PL-61139 Poznan, Poland

[2] Poznan Univ Tech, Inst Mech Technol, 3 Piotrowo St, PL-60965 Poznan, Poland

来源：

POWDER METALLURGY | 2016年 / 59卷 / 04期

关键词：

Alumix; 431; Aluminium alloy; Spark plasma sintering; Microstructure; Mechanical properties; ALLOYS;

D O I：

10.1080/00325899.2016.1169362

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Spark plasma sintering (SPS) has been used to successfully densify a 7075 aluminium alloy obtained from Alumix 431 powder. Sintering experiments were conducted at the temperature of 450 and 500 degrees C for 2.5, 5 and 10 min. All the presented results confirm the excellent sinterability of Alumix 431 powder in vacuum during the SPS process and clearly show the effect of sintering temperatures and holding times on the densification, microstructure and mechanical properties of the obtained sintered compacts. The best results of hardness (1412 +/- 39 MPa), tensile strength (345 +/- 15 MPa) and compressive strength (618 +/- 4 MPa) were obtained by the compacts sintered at 500 degrees C for 5 min.

引用

页码：242 / 248

页数：7

共 50 条

[31] Microstructure and Mechanical Properties of Titanium Processed by Spark Plasma Sintering (SPS)
Chaudhari R.
Bauri R.
Metallography, Microstructure, and Analysis, 2014, 3 (1) : 30 - 35
[32] Microstructure and mechanical properties of materials obtained by spark plasma sintering of Ni3Al-Ni powder mixtures
Shevtsova, Lilia
Mali, Vyacheslav
Bataev, Anatoly
Anisimov, Alexander
Dudina, Dina
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 773 (773):
[33] Effect of mechanical alloying and spark plasma sintering on the microstructure and mechanical properties of ODS Eurofer
Fu, J.
Brouwer, J. C.
Richardson, I. M.
Hermans, M. J. M.
MATERIALS & DESIGN, 2019, 177
[34] Effects of Temperature on Thermal and Mechanical Properties of Spark Plasma Sintered Silicon Nitride Ceramics
Tong Wenxin
Wu Shanghua
Zhang Zhilin
Tu Guizhao
Jiang Qiangguo
RARE METAL MATERIALS AND ENGINEERING, 2015, 44 : 740 - 743
[35] Influence of Nickel Powder Particle Size on the Microstructure and Densification of Spark Plasma Sintered Nickel-Based Superalloy
Ogunbiyi, Olugbenga
Jamiru, Tamba
Sadiku, Rotimi
Adesina, Oluwagbenga
Adesina, Olanrewaju Seun
Olorundaisi, Emmanuel
INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH IN AFRICA, 2021, 53 : 1 - 19
[36] Microstructure and mechanical properties of multiwalled carbon nanotube toughened spark plasma sintered ZrB2 composites
Lin, J.
Huang, Y.
Zhang, H.
Yang, Y.
Hong, Y.
ADVANCES IN APPLIED CERAMICS, 2016, 115 (05) : 308 - 312
[37] Spark plasma sintering of forsterite nanopowder and mechanical properties of sintered materials
Hassanzadeh-Tabrizi, S. A.
CERAMICS INTERNATIONAL, 2017, 43 (17) : 15714 - 15718
[38] Mechanical and wear characteristics of spark plasma sintered titanium/multilayer graphene nanocomposites
Sharma, Deepak
Kumar, Vinod
Singh, Sachin
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2025, 239 (01) : 330 - 339
[39] Nanoindentation study of mechanical and wear properties of spark plasma sintered Ti-6Ni-xTiCN composites
Rominiyi, Azeez Lawan
Mashinini, Peter Madindwa
CERAMICS INTERNATIONAL, 2023, 49 (02) : 2194 - 2203
[40] Effect of Co content on microstructure and mechanical properties of ultrafine grained WC-Co cemented carbide sintered by spark plasma sintering
Liu, Kui
Wang, Zhenhua
Yin, Zengbin
Cao, Liyan
Yuan, Juntang
CERAMICS INTERNATIONAL, 2018, 44 (15) : 18711 - 18718

← 1 2 3 4 5 →