Measurements of silica aggregate particle growth using light scattering and thermophoretic sampling in a coflow diffusion flame

The evolution of silica aggregate particles in a coflow diffusion flame has been studied experimentally using light scattering and thermophoretic sampling techniques. An attempt has been made to calculate the aggregate number density and volume fraction using the measurements of scattering cross section from 90 degrees light scattering with combination of measuring the particle size and morphology from the localized sampling and a TEM image analysis. Aggregate or particle number densities and volume fractions were calculated using Rayleigh-Debye-Gans and Mie theory for fractal aggregates and spherical particles, respectively. Using this technique, the effects of H(2) flow rates on the evolution of silica aggregate particles have been studied in a coflow diffusion flame burner. As the flow rate of H(2) increases, the primary particle diameters of silica aggregates have been first decreased, but, further increase of H(2) flow rate causes the diameter of primary particles to increase and for sufficiently larger flow rates, the fractal aggregates finally become spherical particles. For the cases of high flame temperatures, the particle sizes become larger and the number densities decrease by coagulation as the particles move up within the flame. For cases of low flame temperatures, the primary particle diameters of aggregates vary a little following the centerline of burner and for the case of the lowest flame temperature in the present experiments, the sizes of primary particles even decrease as particles move upward.