Synthesis and evaluation of mechanical and high temperature tribological properties of in-situ Al-TiC composites

被引：90

作者：

Jerome, S. ^{[1
]}

Ravisankar, B. ^{[1
]}

Mahato, Pranab Kumar ^{[1
]}

Natarajan, S. ^{[1
]}

机构：

[1] Natl Inst Technol, Dept Met & Mat Engn, Tiruchirappalli, Tamil Nadu, India

来源：

TRIBOLOGY INTERNATIONAL | 2010年 / 43卷 / 11期

关键词：

In situ metal matrix composite; Sliding wear; Scanning electron microscopy; SLIDING WEAR BEHAVIOR; MATRIX COMPOSITES; ALUMINUM COMPOSITES; GRAPHITE;

D O I：

10.1016/j.triboint.2010.05.007

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In situ Al-TiC (5, 10 and 15 wt%) composites were produced by using a reaction mixture of K2TiF6 and graphite powder with molten metal. The effect of ceramic particulate addition on the high temperature sliding wear resistance of the composites was studied. The sliding wear tests were conducted at room temperature, 120 and 200 degrees C. The wear rate increases with the increase in applied load and decreases with increase in the weight percentage of TiC. Both monolithic and composites were able to withstand thermal softening effects due to the formation of oxidative protective transfer layer. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：2029 / 2036

页数：8

共 33 条

[21] Sliding wear behaviour of Al 6063/TiB2 in situ composites at elevated temperatures
Natarajan, S.
Narayanasamy, R.
Babu, S. P. Kumaresh
Dinesh, G.
Kumar, B. Anil
Sivaprasad, K.
[J]. MATERIALS & DESIGN, 2009, 30 (07) : 2521 - 2531
[22] PADNEY AB, 1996, MAT SCI ENG A-STRUCT, V206, P270
[23] Sliding wear behaviour of aluminium-based metal matrix composites produced by a novel liquid route
Shipway, PH
Kennedy, AR
Wilkes, AJ
[J]. WEAR, 1998, 216 (02) : 160 - 171
[24] In situ fabrication of TiC particulates locally reinforced aluminum matrix composites by self-propagating reaction during casting
Song, M. S.
Zhang, M. X.
Zhang, S. G.
Huang, B.
Li, J. G.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 473 (1-2): : 166 - 171
[25] Microstructural and mechanical characteristics of in situ metal matrix composites
Tjong, SC
Ma, ZY
[J]. MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2000, 29 (3-4) : 49 - 113
[26] Al-TiC composites in situ processed by ingot metallurgy and rapid solidification technology: Part I. Microstructural evolution
Tong, XC
Fang, HS
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1998, 29 (03): : 875 - 891
[27] Synthesis and tribological characterization of in situ cast Al-TiC composites
Tyagi, R
[J]. WEAR, 2005, 259 (1-6) : 569 - 576
[28] The sliding wear behaviour of Al-SiC particulate composites .1. Macrobehaviour
Venkataraman, B
Sundararajan, G
[J]. ACTA MATERIALIA, 1996, 44 (02) : 451 - 460
[29] VENKATARAMAN B, 1996, ACTA MAT, V44, P61473
[30] Effect of temperature on the sliding wear performance of Al alloys and Al matrix composites
Wilson, S
Alpas, AT
[J]. WEAR, 1996, 196 (1-2) : 270 - 278

← 1 2 3 4 →