Hysteresis losses in YBCO coated conductors on textured metallic substrates

Hysteresis losses of YBCO coated conductors on two different textured metallic substrates - (NiFe and NiCrW)- were measured. The measurements were performed in a dc SQUID magnetometer at 5 K in applied magnetic fields up to 6 T. An YBCO layer of the sample on NiCrW substrate was cut to form 2 filaments and measured again in a perpendicular magnetic field as well as in a field at an angle of 450 with respect to the tape face. In a perpendicular magnetic field the hysteresis losses of the 2 filaments were a factor of about 0.6 lower than the losses of the original single filament. The influence on the magnetization of dividing a monocore tape into 2 and 4 filaments was numerically modeled using the critical state model. For full penetration and a perpendicular magnetic field the magnetization decreases proportionally with increasing number of filaments. Hysteresis losses in metallic substrates were substantially lower than the total losses of the composite tapes.