Preparation of Si2N2O Ceramics by Spark Plasma Sintering

被引：3

作者：

Alekseeva, L. S. ^{[1
]}

Andreev, P., V ^{[1
]}

Drozhilkin, P. D. ^{[1
]}

Boldin, M. S. ^{[1
]}

Smetanina, K. E. ^{[1
]}

Murashov, A. A. ^{[1
]}

Karazanov, K. O. ^{[1
]}

Shcherbak, G., V ^{[1
]}

机构：

[1] Lobachevsky State Univ, Nizhnii Novgorod 603022, Russia

来源：

INORGANIC MATERIALS | 2022年 / 58卷 / 07期

关键词：

silicon oxynitride; spark plasma sintering; ceramics; density; SILICON-NITRIDE; MECHANICAL-PROPERTIES; MICROSTRUCTURE; FABRICATION; OXYNITRIDE;

D O I：

10.1134/S0020168522070020

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Powder mixtures based on Si3N4 nanoparticles and yttrium and aluminum oxides were prepared. Ceramic samples with a relative density of 95-96% have been produced by spark plasma sintering at a pressure of 80 MPa and a heating rate of 50 degrees C/min. The microstructure of the samples has been shown to be formed by Si2N2O grains similar to 0.7 mu m in size, with an amorphous oxide phase in between. The highest hardness (13.3 GPa) was reached by the sample containing the Y2O3 and Al2O3 oxides in the molar ratio 2 : 1 and obtained at a sintering temperature of 1770 degrees C.

引用

页码：772 / 777

页数：6

共 17 条

[1] Andreev P. V., 2021, IOP Conference Series: Materials Science and Engineering, V1014, DOI 10.1088/1757-899X/1014/1/012002
[2] Billy M., 1981, Ceramics International, V7, P13, DOI 10.1016/0272-8842(81)90033-X
[3] Comparative Study of Hot Pressing and High-Speed Electropulse Plasma Sintering of Al2O3/ZrO2/Ti(C,N) Powders
Chuvil'deev, V. N.
Boldin, M. S.
Dyatlova, Ya. G.
Rumyantsev, V. I.
Ordanyan, S. S.
[J]. RUSSIAN JOURNAL OF INORGANIC CHEMISTRY, 2015, 60 (08) : 987 - 993
[4] Activated reaction synthesis of silicon oxynitride from silica and silicon nitride
Fruhstorfer, Jens
Kerber, Florian
Weigelt, Christian
Moritz, Kirsten
Aneziris, Christos G.
[J]. CERAMICS INTERNATIONAL, 2018, 44 (07) : 8467 - 8475
[5] SEPARATION OF PARTICLE SIZE AND LATTICE STRAIN IN INTEGRAL BREADTH MEASUREMENTS
HALDER, NC
WAGNER, CNJ
[J]. ACTA CRYSTALLOGRAPHICA, 1966, 20 : 312 - &
[6] Fracture energy of an aligned porous silicon nitride
Inagaki, Y
Ohji, T
Kanzaki, S
Shigegaki, Y
[J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2000, 83 (07) : 1807 - 1809
[7] Kawai C, 1997, J AM CERAM SOC, V80, P2705, DOI 10.1111/j.1151-2916.1997.tb03179.x
[8] Fabrication of silicon nitride nanoceramics - Powder preparation and sintering: A review
Nishimura, Toshiyuki
Xu, Xin
Kimoto, Koji
Hirosaki, Naoto
Tanaka, Hidehiko
[J]. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2007, 8 (7-8) : 635 - 643
[9] PROCESSING, MECHANICAL-PROPERTIES, AND OXIDATION BEHAVIOR OF SILICON OXYNITRIDE CERAMICS
OHASHI, M
KANZAKI, S
TABATA, H
[J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1991, 74 (01) : 109 - 114
[10] Petzow G, 2002, STRUCT BOND, V102, P47

← 1 2 →