Performance of steel beams strengthened with CFRP laminate - Part 1: Laboratory tests

被引:65
作者
Linghoff, D. [1 ]
Al-Emrani, M. [1 ]
Kliger, R. [1 ]
机构
[1] Chalmers, Dept Struct Engn, S-41296 Gothenburg, Sweden
关键词
Adhesion; Debonding; Delamination; Laminates;
D O I
10.1016/j.compositesb.2009.05.008
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Research on the behaviour of beams strengthened with different configurations of carbon-fibre-rein-forced-polymer (CFRP) laminates, in both the serviceability and ultimate limit state, has been conducted at Chalmers University of Technology. Additionally, the failure modes and the interfacial shear stresses in the bond line have been studied. The methods used in the research work were laboratory tests and simplified analytical solutions and the work took the form of parametric studies on the strengthened steel beams. CFRP laminates and epoxies with different material properties were attached to the tension flange of steel beams with I cross-sections. The strengthened beams were tested in four-point bending where the deflection of the beams and the strains, in both the steel beams and the laminates, were measured. The results show that it is possible to increase the moment capacity of a steel beam with CFRP bonded to its tension flange. Additionally, it is possible to predict the degree of increase in capacity by using simplified analytical solutions. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码:509 / 515
页数:7
相关论文
共 16 条
[1]  
Al-Saidy AH, 2004, J COMPOS CONSTR MAR
[2]  
BAKIS CE, 2002, J COMPOS CONSTR MAY
[3]  
CHACON AP, 2003, NSF REU 2003 U DEL C
[4]  
Dawood M., 2006, 3 INT C BRIDG MAINT
[5]   Stress analysis of steel beams reinforced with a bonded CFRP plate [J].
Deng, J ;
Lee, MMK ;
Moy, SSJ .
COMPOSITE STRUCTURES, 2004, 65 (02) :205-215
[6]  
LIU X, 2001, CCC 2001 COMP CONSTR
[7]  
LUKE S, 2001, P INT C FRP COMP CIV
[8]  
Mertz DR., 1996, REHABILITATION STEEL
[9]  
Miller TC, 2001, J BRIDGE ENG NOV
[10]  
Schnerch D, 2003, P 2 INT WORKSH STRUC