Reducing tool wear in abrasive cutting

被引：11
作者：
Neugebauer, R
Hess, KU
Gleich, S [1 ]
Pop, S
机构：
[1] Chemnitz Univ Technol, Dept Machine Tools, D-09107 Chemnitz, Germany
[2] Univ Munich, Dept Earth & Enviornm Sci, D-80333 Munich, Germany
来源：
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2005年 / 45卷 / 10期
关键词：
tool wear; abrasive cutting; shape defined grit; alumina abrasive; grinding;
D O I：
10.1016/j.ijmachtools.2005.01.002
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The abrasive Cut-Off with stationary or hand-operated machines for cutting or grinding metal is still a very common procedure in many enterprises. Because of the relatively low price of the tool 'cut-off wheel' little attention is paid to the life-time of the grits. Since it is possible to obtain shape-defined grits for the production of grinding wheels an experimental study was carried out producing and testing such cutting-wheels. It has been shown that it is possible to reduce the wear of the wheel by means of using shape-defined grits. The following paper describes selected experimental studies and their results. (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1120 / 1123
页数：4
相关论文
共 50 条
[41]   Influence of electric circuit of cutting systems on tool wear [J].
Kudou, K ;
Ono, T ;
Hiyoshi, H ;
Okada, S ;
Suzuki, A .
JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 1998, 43 (01) :58-64
[42]   Modeling and simulation of tool wear during the cutting process [J].
Salvatore, F. ;
Saad, S. ;
Hamdi, H. .
14TH CIRP CONFERENCE ON MODELING OF MACHINING OPERATIONS (CIRP CMMO), 2013, 8 :305-310
[43]   Sensor fusion strategy in the monitoring of cutting tool wear [J].
Mahardika, M ;
Taha, Z ;
Suharto, D ;
Mitsui, K ;
Aoyama, H .
FRACTURE AND STRENGTH OF SOLIDS VI, PTS 1 AND 2, 2006, 306-308 :727-732
[44]   EXPERIMENTATION AND PREDICTION OF THE WEAR OF A CUTTING TOOL IN TURNING PROCESS [J].
Merzoug, M. ;
Benamara, N. ;
Boulenouar, A. ;
Bouchouicha, B. ;
Mazari, M. .
ARCHIVES OF METALLURGY AND MATERIALS, 2018, 63 (02) :563-573
[45]   Tool wear monitoring and selection of optimum cutting conditions with progressive tool wear effect and input uncertainties [J].
Pal, Sukhomay ;
Heyns, P. Stephan ;
Freyer, Burkhard H. ;
Theron, Nico J. ;
Pal, Surjya K. .
JOURNAL OF INTELLIGENT MANUFACTURING, 2011, 22 (04) :491-504
[46]   Tool wear monitoring and selection of optimum cutting conditions with progressive tool wear effect and input uncertainties [J].
Sukhomay Pal ;
P. Stephan Heyns ;
Burkhard H. Freyer ;
Nico J. Theron ;
Surjya K. Pal .
Journal of Intelligent Manufacturing, 2011, 22 :491-504
[47]   Dry machining of aluminum for proper selection of cutting tool: tool performance and tool wear [J].
Pattnaik, Sisira Kanta ;
Bhoi, Neeraj Kumar ;
Padhi, Sachidananda ;
Sarangi, Saroj Kumar .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 98 (1-4) :55-65
[48]   Dry machining of aluminum for proper selection of cutting tool: tool performance and tool wear [J].
Sisira Kanta Pattnaik ;
Neeraj Kumar Bhoi ;
Sachidananda Padhi ;
Saroj Kumar Sarangi .
The International Journal of Advanced Manufacturing Technology, 2018, 98 :55-65
[49]   Methodology of Evaluation of Abrasive Tool Wear with the Use of Laser Scanning Microscopy [J].
Lipinski, Dariusz ;
Kacalak, Wojciech ;
Tomkowski, Robert .
SCANNING, 2014, 36 (01) :53-63
[50]   The cutting tool wear of the cutting tool part of the cast iron GTW 35-04 during drilling [J].
Jurko, Jozef .
MECHANICAL ENGINEERING, MATERIALS SCIENCE AND CIVIL ENGINEERING II, 2014, 470 :589-592
12345