Evaluation of the efficiency of the dryers in thermoplastic vulcanisate extrusion production lines with the energy and exergy analysis method

被引：2

作者：

Dogru, Aziz Kagan ^{[1
]}

Ozgener, Onder ^{[2
]}

Ozgener, Leyla ^{[2
,3
]}

机构：

[1] Ege Univ, Grad Sch Nat & Appl Sci, Solar Energy Sci Branch, TR-35100 Izmir, Turkey

[2] Ege Univ, Solar Energy Inst, Izmir, Turkey

[3] Manisa Celal Bayar Univ, Fac Engn, Dept Mech Engn, Muradiye, Manisa, Turkey

来源：

INTERNATIONAL JOURNAL OF EXERGY | 2021年 / 36卷 / 2-4期

关键词：

energy efficiency in industry; drying; exergy; energy; extrusion;

D O I：

10.1504/IJEX.2021.118728

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

In this study, energy and exergy analysis of the drying process in producing a sealing profile with extrusion in Manisa, using real operational data was conducted. The drying system was analysed in regards to changes in ambient temperature (0-30 degrees C) and drying air temperature (75-105 degrees C). The energy efficiency of the system was in the range of 80.79%-88.24% and the exergy efficiency was in the range of 15.88%-41.94%. As a result of the analysis, it can be concluded that the drying conditions with the highest efficiency values were at 0 degrees C outdoor temperature and 75 degrees C drying air.

引用

页码：361 / 381

页数：21

共 21 条

[1] An Overview of Energy and Exergy Analysis to the Industrial Sector, a Contribution to Sustainability [J].

Arango-Miranda, Raul ;

Hausler, Robert ;

Romero-Lopez, Rabindranarth ;

Glaus, Mathias ;

Patricia Ibarra-Zavaleta, Sara .

SUSTAINABILITY, 2018, 10 (01)

[2]

Bejan A., 2006, Advanced Engineering Thermodynamics

[3]

Cengel Y., 1996, Thermodynamics an engineering approach, V5th

[4] A new model for thermodynamic analysis of a drying process [J].

Dincer, I ;

Sahin, AZ .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2004, 47 (04) :645-652

[5]

Dogru A.K., 2020, THESIS EGE U, P57

[6] Thermodynamics analysis of biomass fired brick drying process [J].

Dogru, Aziz Kagan ;

Camcioglu, Emre ;

Ozgener, Onder ;

Ozgener, Leyla .

INTERNATIONAL JOURNAL OF EXERGY, 2021, 35 (04) :421-437

[7] Analyzing thermodynamic improvement potential of a selected cement manufacturing process: Advanced exergy analysis [J].

Fellaou, S. ;

Bounahmidi, T. .

ENERGY, 2018, 154 :190-200

[8] Electrical, Mechanical, and Thermal Properties of LDPE Graphene Nanoplatelets Composites Produced by Means of Melt Extrusion Process [J].

Gaska, Karolina ;

Xu, Xiangdong ;

Gubanski, Stanislaw ;

Kadar, Roland .

POLYMERS, 2017, 9 (01)

[9] A new energy efficient single-stage flash drying system integrated with heat recovery applications in industry [J].

Ishaq, Haris ;

Dincer, Ibrahim .

DRYING TECHNOLOGY, 2020, 38 (5-6) :735-746

[10] Exergy analysis of a spray dryer: Methods and interpretations [J].

Johnson, Perry William ;

Langrish, Timothy Alan Granville .

DRYING TECHNOLOGY, 2018, 36 (05) :578-596

← 1 2 3 →