Three-dimensional fracture mapping of multi-fragmentary patella fractures (AO/OTA 34C3)

Background: Multi-fragmentary patella fractures (MFPFs) are common patella fracture type. Low-profile plate fixation seems to be promising advancement in the treatment of such difficult fractures. There is no systematic morphologic study specifically for MFPFs to provide objective reference for the improvement of future implants and biomechanical models. This study aimed to delineate and quantify the location and spatial frequency of fracture lines, comminution zones, and coronal plane fragments in MFPFs using threedimensional (3D) CT mapping technique. Methods: A total of 187 MFPFs were retrospectively reviewed and analyzed. Fractures were digitally reconstructed from CT data, and fracture lines, comminution zones, and coronal fragments were graphically overlaid onto a 3D patella template. Fracture characteristics were summarized qualitatively based on the fracture maps and quantitatively on the counts and volume of each fragment. Furthermore, according to the classic fracture patterns concerning MFPFs, subgroup analysis was conducted. Results: On average, we observed 7 fragments in each fracture, 3 of which were <1 cm3. Most fractures (81.2%) had coronal fragments on the anterior and/or posterior patella surfaces. We identified three classic patella fracture patterns: transverse with comminution, stellate, and "displaced comminuted" in 104, 54, and 29 knees, respectively. 3D maps demonstrated distinct distribution fracture patterns of fracture lines, comminution zones, and coronal fragments. Conclusions: Supero-medial corner of the patella was seldomly involved, and might be used as the cornerstone for fixation. Coronal fragments were common on both anterior and posterior patella surfaces, justifying the application of anterior plate osteosynthesis characterized by multi-planar fixation. Comminution areas mainly concentrated in the lower half of the patella, potentially suitable for an implant in combination with sutures or circumferential cerclage wiring. The described 3D features of MFPFs could provide reference for the design of future implants and biomechanical models.