A metallographic investigation of the effect of bonding pressure and surface finish on isostatic diffusion bonding of Ti-25Al-10Nb-3V-1Mo

被引：0

作者：

Talas, S. ^{[1
]}

Khan, T. I. ^{[2
]}

机构：

[1] Afyon Kocatepe Univ, Dept Met & Mat Engn, Afyon, Turkey

[2] Univ Qatar, Dept Mech & Ind Engn, Doha, Qatar

来源：

KOVOVE MATERIALY-METALLIC MATERIALS | 2015年 / 53卷 / 02期

关键词：

diffusion bonding; titanium aluminides; surface finish; MICROSTRUCTURE EVOLUTION; INTERMETALLIC ALLOY; BOUNDARIES; ALPHA(2); BEHAVIOR; TENSILE; PHASE;

D O I：

10.4149/km_2015_2_97

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The performance of diffusion bonding is critically dependent on the surface finish and the bonding pressure holding the mating surfaces together for an appropriate time. Effects of surface finish and pressure on the bonding performance of Ti-25Al-10Nb-3V-1Mo super alpha two titanium aluminides were investigated at the temperature of 1000 degrees C for 1 h holding time. Results showed that successful diffusion bonding was achieved using 800 Grit/15 MPa and 180 Grit/20 MPa surface finish and pressure combinations. It was also shown that the bonding pressure and surface finish combinations used in this study affected the microstructure and the physical appearance of bond line in all specimens.

引用

页码：97 / 103

页数：7

共 26 条

[1] Allen D. J., 1981, P C JOINING METAL PR, P96
[2] Banerjee D., 1989, INTERMETALLIC COMPOU
[3] BARTLE PM, 1975, WELD J, V54, P799
[4] MICROSTRUCTURE AND TENSILE PROPERTIES OF AGED SUPERALPHA-2 INTERMETALLIC COMPOUND
CHEN, Z
SIMCA, F
COPE, MT
[J]. MATERIALS SCIENCE AND TECHNOLOGY, 1992, 8 (08) : 729 - 738
[5] Evolution of microstructure and superplastic deformation mechanism in super α2Ti3Al base alloys
Fu, HC
Huang, JC
Wang, TD
Bampton, CC
[J]. ACTA MATERIALIA, 1998, 46 (02) : 465 - 479
[6] MODELING SOLID-STATE DIFFUSION BONDING
HILL, A
WALLACH, ER
[J]. ACTA METALLURGICA, 1989, 37 (09): : 2425 - 2437
[7] HUANG C, 1995, MATER SCI TECH SER, V11, P143, DOI 10.1179/026708395790164670
[8] FLOW BEHAVIOR AND MICROSTRUCTURE DEVELOPMENT OF FORGED TI-25AL-10NB-3V-1MO (SUPER ALPHA(2))
HUANG, C
DEAN, TA
LORETTO, MH
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1995, 191 (1-2): : 39 - 47
[9] Islam M. F., 1997, P TITANIUM EXTRACTIO, P175
[10] Microstructure and superplasticity of a Ti-25Al-10Nb-3V-1Mo intermetallic alloy
Jobart, D
Blandin, JJ
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1996, 207 (02): : 170 - 180

← 1 2 3 →