The effect of volumetric quality on heat transfer and fluid flow characteristics of air-assistant jet impingement

被引:14
|
作者
Friedrich, Brian K. [1 ]
Glaspell, Aspen W. [1 ]
Choo, Kyosung [1 ]
机构
[1] Youngstown State Univ, Mech & Ind Engn Dept, Youngstown, OH 44555 USA
关键词
Impinging jet; Two phase; Hydraulic jump; FREE-SURFACE JET; LIQUID JET; HYDRAULIC JUMP; RADIAL SPREAD; GAS; MODEL;
D O I
10.1016/j.ijheatmasstransfer.2016.05.021
中图分类号
O414.1 [热力学];
学科分类号
摘要
Heat transfer characteristics of air-assistant water jet impingement was experimentally investigated under a fixed water flow rate condition. Water and air were used as the test fluids. The effects of volumetric quality (beta = 0-0.9) on the Nusselt number and pressure were considered. The results showed that the stagnation Nusselt number increased with volumetric quality, attained a maximum value at around 0.8 of the volumetric quality, and then decreased. The stagnation Nusselt number of the air-assistant water jet impingement is governed by the stagnation pressure. Based on the experimental results, a new correlation for the normalized stagnation Nusselt number is developed as a function of the normalized stagnation pressure alone. In addition, the lateral variation of Nusselt number is governed by hydraulic jump radius. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码:261 / 266
页数:6
相关论文
共 50 条
  • [1] Experimental study of the hydrodynamic and heat transfer of air-assistant circular water jet impinging a flat circular disk
    Friedrich, Brian K.
    Ford, Tamira D.
    Glaspell, Aspen W.
    Choo, Kyosung
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 106 : 804 - 809
  • [2] NUMERICAL STUDY ON FLOW AND HEAT TRANSFER CHARACTERISTICS OF JET IMPINGEMENT
    Wang, Xinjun
    Liu, Rui
    Bai, Xiaowei
    Yao, Jinling
    PROCEEDINGS OF THE ASME TURBO EXPO 2011, VOL 5, PTS A AND B, 2012, : 1155 - 1164
  • [3] RANS Simulation of the Effect of Pulse Form on Fluid Flow and Convective Heat Transfer in an Intermittent Round Jet Impingement
    Pakhomov, M. A.
    Terekhov, V., I
    ENERGIES, 2020, 13 (15)
  • [4] Flow and Heat Transfer Characteristics of Inclined Jet Impingement on a Flat Plate
    Lak, Amir
    Calisir, Tamer
    Baskaya, Senol
    JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2020, 23 (03): : 697 - 706
  • [5] Heat transfer and flow characteristics of turbulent slot jet impingement on plane and ribbed surfaces
    Shukla, A. K.
    Dewan, A.
    THERMOPHYSICS AND AEROMECHANICS, 2018, 25 (05) : 717 - 734
  • [6] ENHANCED HEAT TRANSFER CHARACTERISTICS OF CONJUGATED AIR JET IMPINGEMENT ON A FINNED HEAT SINK
    Qiu, Shuxia
    Xu, Peng
    Geng, Liping
    Mujumdar, Arun S.
    Jiang, Zhouting
    Yang, Jinghua
    THERMAL SCIENCE, 2017, 21 (01): : 279 - 288
  • [7] Effect of multiple arc protrusion ribs on heat transfer and fluid flow of a circular-jet impingement solar air passage
    Nadda, Rahul
    Maithani, Rajesh
    Kumar, Anil
    CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2017, 120 : 114 - 133
  • [8] Effect of internal crossflow on impingement cooling flow and heat transfer characteristics
    Wang, Pengfei
    Liu, Jun
    Wang, Pei
    Liu, Jiajie
    Wang, Haohan
    Yang, Wenshuai
    Zhu, Junqiang
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2024, 159
  • [9] SIMULATION OF TURBULENT HEAT TRANSFER IN JET IMPINGEMENT OF AIR FLOW ONTO A FLAT WALL
    Raisee, M.
    Noursadeghi, A.
    Hejazi, B.
    Khodaparast, S.
    Besharati, S.
    ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS, 2007, 1 (04) : 314 - 324
  • [10] Effect of the Nozzle Geometry on Flow Field and Heat Transfer in Annular Jet Impingement
    Zhong, Ying
    Zhou, Chao
    Shi, Yipeng
    ENERGIES, 2022, 15 (12)