High-performance and cost-effective triboelectric nanogenerators by sandpaper-assisted micropatterned polytetrafluoroethylene

We reported a facile, inexpensive, and high-performance triboelectric nanogenerator (TENG) designed by utilizing the micropatterned polytetrafluoroethylene (MP-PTFE) and aluminum (Al) as triboelectric materials with opposite tendencies. To reduce the fabrication cost as well as to enhance the contact area of PTFE, the micropatterns were formed on its surface by adopting a simple and cost-effective thermal imprinting lithography using sandpapers as a master mold. Consequently, the micropatterns were successfully replicated on the PTFE from the low surface energy sandpaper mold, which does not require any surfactant coating and expensive high vacuum equipment. The proposed TENG device can convert mechanical energy into electricity by continuous contact and separation between the MP-PTFE and Al. The sandpapers with three grit sizes were employed and the effect of average diameter of micropatterns on the electrical output of TENG was analyzed. The MP-PTFE replicated from the sandpaper with a larger grit size can offer a high contact area between the electrodes, thus resulting in the highest electrical output of TENG. Additionally, the effect of external pushing force and load resistance on the output performance of the TENG device was investigated, including the device robustness. (C) 2018 Elsevier Ltd. All rights reserved.