Tensile-compressive creep asymmetry of recent die cast magnesium alloys

被引:9
|
作者
Xu, Su
Gharghouri, Michael A.
Sahoo, Mahi
机构
[1] Nat Resources Canada, CANMET Mat Technol Lab, Ottawa, ON K1A 0G1, Canada
[2] Natl Res Council Canada, Canadian Neutron Beam Ctr, Chalk River, ON K0J 1J0, Canada
关键词
10;
D O I
10.1002/adem.200700163
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The tensile-compressive creep asymmetry of die cast magnesium alloys is experimentally explored and the possible deformation mechanisms are discussed. Creep tests were performed under tension and compression at 125°C and 150 °C on die cast Mg alloys AM50, AE44 and AJ62A. Higher tensile than compressive creep strengths were observed for all alloys except for low pressure die cast AM50 at a low creep stress of 35 MPa at 125 °C. An aging treatment of 250 hours at 180 °C was employed for AM50 samples to obtain an over-aged microstructure that would minimize the effects of dynamic precipitation of β-Mgl7A112 on creep. The creep data for the aged samples showed significant scatter, and the trend in tensile-compressive creep asymmetry of the aged samples is not clear for the short-term creep tests under high creep stresses.
引用
收藏
页码:807 / 812
页数:6
相关论文
共 50 条
  • [21] Influence of microstructure on the fracture and tensile properties of die cast and thixomolded magnesium alloys
    Johnson Controls, Inc, Milwaukee, United States
    Mater Res Soc Symp Proc, (35-40):
  • [22] Influences of Nd on tensile and fatigue fracture mechanism of die cast magnesium alloys
    Yang, You
    Liu, Yong-Bing
    Fang, Yi
    Zhuzao/Foundry, 2007, 56 (01): : 41 - 45
  • [23] The effect of silicon content on the microstructure and creep behavior in die-cast magnesium AS alloys
    M. S. Dargusch
    G. L. Dunlop
    A. L. Bowles
    K. Pettersen
    P. Bakke
    Metallurgical and Materials Transactions A, 2004, 35 : 1905 - 1909
  • [24] Primary Creep of Die-Cast Magnesium-Rare Earth Based Alloys
    Zhu, S. M.
    Gibson, M. A.
    Nie, J. F.
    Easton, M. A.
    Dunlop, G. L.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (09): : 2036 - 2041
  • [25] The effect of silicon content on the microstructure and creep behavior in die-cast magnesium AS alloys
    Dargusch, MS
    Bowles, AL
    Pettersen, K
    Bakke, P
    Dunlop, GL
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2004, 35A (06): : 1905 - 1909
  • [26] Creep and bolt-load retention behavior of die-cast magnesium alloys
    Sohn, KY
    Yurko, JA
    Chen, FC
    Jones, JW
    Allison, JE
    AUTOMOTIVE ALLOYS II, 1998, : 81 - 90
  • [27] Modeling the tensile failure of cast magnesium alloys
    Weiler, J. P.
    Wood, J. T.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 537 : 133 - 140
  • [28] EXPLORING THE TENSILE-COMPRESSIVE ASYMMETRY OF TITANIUM SAMPLES MADE BY WIRE ARC DIRECTED ENERGY DEPOSITION
    Palacios, Blanca
    Paul, Tanaji
    Agarwal, Arvind
    Langan, Sean
    ADVANCED MATERIALS & PROCESSES, 2024, 182 (06): : 11 - 15
  • [29] Compressive Creep Behavior of High-Pressure Die-Cast Aluminum-Containing Magnesium Alloys Developed for Elevated Temperature Applications
    Gavras, Sarkis
    Zhu, Suming
    Easton, Mark A.
    Gibson, Mark A.
    Dieringa, Hajo
    FRONTIERS IN MATERIALS, 2019, 6
  • [30] EXPLORING THE TENSILE-COMPRESSIVE ASYMMETRY OF TITANIUM SAMPLES MADE BY WIRE ARC DIRECTED ENERGY DEPOSITION
    Palacios, Blanca
    Paul, Tanaji
    Agarwal, Arvind
    Langan, Sean
    Advanced Materials and Processes, 2024, 182 (06): : 10 - 15