Microstructure regulation of Sn-3.0Ag-0.5Cu micro-solder joints by hybridizing nano-TiO2

被引：5
作者：
Li, Zhenlong [1 ]
Cheng, Lanxian [2 ]
Li, Guoyuan [3 ]
机构：
[1] Zunyi Med Univ, Zhuhai Campus, Zhuhai 519041, Guangdong, Peoples R China
[2] South China Agr Univ, Coll Elect Engn, Guangzhou 510642, Guangdong, Peoples R China
[3] South China Univ Technol, Sch Elect & Informat Engn, Guangzhou 510641, Guangdong, Peoples R China
来源：
MICROELECTRONICS RELIABILITY | 2022年 / 131卷
基金：
中国国家自然科学基金;
关键词：
Micro-solder joint; Intermetallic growth; Activation energy; Nano-TiO; 2; addition; TIO2; NANOPARTICLES; TENSILE PROPERTIES; IMC GROWTH; LAYERS; SIZE;
D O I：
10.1016/j.microrel.2022.114515
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The intermetallic compound (IMC) formation kinetics of Sn-3.0Ag-0.5Cu micro-solder joints were studied under 100 ?C, 120 ?C, and 150 ?C isothermal aging test. The addition of nano-TiO2 has a great influence on interface reaction, significantly reducing the thickness of IMC. The thickness of IMC layer is able to be regulated by controlling the doping concentration, and the minimum value was achieved with 0.1 wt% doping. The activation energy of IMC formation was approved to be raised after the composite of nano-TiO2, which can further decrease the atomic diffusion rate, and eventually block the overgrowth of IMC. Grain boundary pinning mechanism is regarded as the most important mechanism for inhibiting the growth of IMC because of nano-TiO2 addition.
引用
收藏
页数：8
相关论文
共 50 条
  • [31] Effect of nano Co reinforcements on the structure of the Sn-3.0Ag-0.5Cu solder in liquid and after reflow solid states
    Yakymovych, Andriy
    Mudry, Stepan
    Shtablavyi, Ihor
    Ipser, Herbert
    MATERIALS CHEMISTRY AND PHYSICS, 2016, 181 : 470 - 475
  • [32] Refinement of the β-Sn Grains in Ni-Doped Sn-3.0Ag-0.5Cu Solder Joints with Cu-Based and Ni-Based Substrates
    Chou, Tzu-Ting
    Chen, Wei-Yu
    Fleshman, Collin Jordon
    Duh, Jenq-Gong
    JOURNAL OF ELECTRONIC MATERIALS, 2018, 47 (05) : 2911 - 2919
  • [33] Effect of 0.5 wt% nano-TiO2 addition into low-Ag Sn0.3Ag0.7Cu solder on the intermetallic growth with Cu substrate during isothermal aging
    Wu, R. W.
    Tsao, L. C.
    Chen, R. S.
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2015, 26 (03) : 1858 - 1865
  • [34] Effect of nano-TiO2 addition on microstructural evolution of small solder joints
    Li, Z. L.
    Li, G. Y.
    Cheng, L. X.
    Huang, J. H.
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2016, 27 (06) : 6076 - 6087
  • [35] Effect of kaolin geopolymer ceramic addition on the properties of Sn-3.0Ag-0.5Cu solder joint
    Zaimi, N. S. Mohamad
    Salleh, M. A. A. Mohd
    Abdullah, M. M. A. B.
    Ahmad, R.
    Mostapha, M.
    Yoriya, S.
    Chaiprapa, J.
    Zhang, G.
    Harvey, D. M.
    MATERIALS TODAY COMMUNICATIONS, 2020, 25
  • [36] Improved shear property of Sn-3.0Ag-0.5Cu/Ni micro solder joints under thermal shock between 77 K and 423 K by adding TiO2 nanoparticles
    Tian, Ruyu
    Gao, Yan
    Wen, Jiayue
    Lin, Pengrong
    Xu, Shimeng
    Tian, Yanhong
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 29 : 5034 - 5047
  • [37] Effect of 0D and 1D ZnO nano additive reinforced Sn-3.0Ag-0.5Cu solder paste on InGaN LED chip/ENIG joints
    Rajendran, Sri Harini
    Seo, Seong Min
    Jung, Jae Pil
    MATERIALS TODAY COMMUNICATIONS, 2023, 35
  • [38] Discrete Phase Model (DPM) study of nano-reinforced Lead Free Solder Sn-3.0Ag-0.5Cu (SAC305)
    Mukhtar, M. A. Fatah M.
    Abas, Aizat
    Haslinda, M. S.
    Ani, F. Che
    Abdullah, M. Z.
    Jalar, A.
    Ismail, R.
    INTERNATIONAL CONFERENCE ON AEROSPACE AND MECHANICAL ENGINEERING (AEROMECH17), 2018, 370
  • [39] Utilization of a Porous Cu Interlayer for the Enhancement of Pb-Free Sn-3.0Ag-0.5Cu Solder Joint
    Jamadon, Nashrah Hani
    Tan, Ai Wen
    Yusof, Farazila
    Ariga, Tadashi
    Miyashita, Yukio
    Hamdi, Mohd
    METALS, 2016, 6 (09)
  • [40] Effect of nano-TiO2 addition on the microstructure and bonding strengths of Sn3.5Ag0.5Cu composite solder BGA packages with immersion Sn surface finish
    Leong, J. C.
    Tsao, L. C.
    Fang, C. J.
    Chu, C. P.
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2011, 22 (09) : 1443 - 1449
12345