Dendritic structural transformation of laser surface remelted γ-TiAl based alloy during post-heat treatment

被引：6
作者：
Wu, GQ
Luo, GX
Huang, Z
Ruan, ZJ
机构：
[1] Beijing Univ Aeronaut & Astronaut, Sch Mat Sci & Engn, Beijing 100083, Peoples R China
[2] Huazhong Univ Sci & Technol, State Key Lab Laser Technol, Wuhan, Peoples R China
来源：
MATERIALS LETTERS | 2006年 / 60卷 / 03期
基金：
中国国家自然科学基金;
关键词：
TiAl based alloy; laser processing; heat treatment; hardness; microstructure;
D O I：
10.1016/j.matlet.2005.09.001
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Laser surface remelting followed by heat treatments at 1000 degrees C for different time was carried out on gamma-TiAl based alloy. The characteristics of structural transformation of laser surface remelted gamma-TiAl based alloy were investigated by high-temperature microscope, TEM and XRD. The results show that the phase transformation (alpha(2) -> gamma) in TiAl alloy occurred at the earlier stage of post-heat treatment, and the dendritic structure transformed firstly at the intergranular, then expanded into the transgranular, finally changed to ultrafine equiaxed grain structure, at the same time, micro-hardness of laser-surface remelted gamma-TiAl based alloy had the corresponding change with the structural trans fori-nation. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码：406 / 409
页数：4
相关论文
共 50 条
[41]   Kinetics of structure transformation in pulsed plasma high-Cr coatings under post-heat treatment [J].
Efremenko, B., V ;
Chabak, Yu G. ;
Efremenko, V. G. ;
Fedun, V., I ;
Pastukhova, T., V ;
Halfa, Hossam Ahmed ;
Azarkhov, A. Yu ;
Vlasovets, V. M. .
FUNCTIONAL MATERIALS, 2020, 27 (01) :117-124
[42]   The effect of pre-heat and post-heat treatment on the hardness and blackening process of electroless NiP deposits on titanium alloy [J].
Alhaji, A. ;
Sadeghi, B. ;
Kamali, S. .
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2020, 8 (04)
[43]   Effect of Post-heat Treatment on the Tensile and Cryogenic Impact Toughness Properties of Inconel 718 Manufactured by Selective Laser Melting [J].
Park, So-Yeon ;
Kim, Kyu-Sik ;
Kim, Min-Cheol ;
Kassner, Michael E. ;
Lee, Kee-Ahn .
ADVANCED ENGINEERING MATERIALS, 2021, 23 (03)
[44]   Analysis of Fatigue Properties of Selective Laser Melting 316L Stainless Workpiece After Post-heat Treatment [J].
Zhao, Xinlong ;
Yang, Shanglei ;
Bi, Junhang ;
Tian, Jiawei ;
Li, Yanlei ;
Huang, Yubao .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
[45]   Microstructural evolution of a PM TiAl alloy during heat treatment in α+γ phase field [J].
Meike Su ;
Lijing Zheng ;
Zebao Lang ;
Jie Yan ;
Hu Zhang .
Rare Metals, 2012, 31 :424-429
[46]   Microstructural evolution of a PM TiAl alloy during heat treatment in α+γ phase field [J].
SU Meike a ZHENG Lijing a LANG Zebao b YAN Jie a and ZHANG Hu a a School of Materials Science and Engineering Beijing University of Aeronautics and Astronautics Beijing China ;
b Aerospace Research Institute of Materials Processing Technology Beijing China .
Rare Metals, 2012, 31 (05) :424-429
[47]   Strength Optimization of Diffusion-Bonded Ti2AlNb Alloy by Post-Heat Treatment [J].
Liu, Haijian ;
Li, Tianle ;
Li, Xifeng ;
Wu, Huiping ;
Wang, Zhiqiang ;
Chen, Jun .
ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2025, 38 (04) :614-626
[48]   Friction deposition additive manufacturing of alloy 718: Effect of post-heat treatment on microstructures and mechanical properties [J].
Cyril Joseph Daniel Santiagu ;
Damodaram Ramachandran ;
Manogna Karthik Gangaraju ;
Koteswara Rao Sajja Rama .
The International Journal of Advanced Manufacturing Technology, 2023, 128 :3901-3919
[49]   Laser powder bed fusion of high-strength low-alloy steels with post-heat treatment design for enhanced mechanical performance [J].
Sridar, Soumya ;
Wang, Zhangwei ;
Xiong, Wei .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 895
[50]   Laser additive manufacturing and post-heat treatment on microstructure and mechanical properties of 9Cr steel [J].
Feng, Junyi ;
Zhang, Peilei ;
Jia, Zhiyuan ;
Yu, Zhishui ;
Fang, Chao ;
Yan, Hua ;
Shi, Haichuan ;
Tian, Yingtao ;
Xie, Fan .
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2022, 198
12345