Dendritic structural transformation of laser surface remelted γ-TiAl based alloy during post-heat treatment

被引：6
作者：
Wu, GQ
Luo, GX
Huang, Z
Ruan, ZJ
机构：
[1] Beijing Univ Aeronaut & Astronaut, Sch Mat Sci & Engn, Beijing 100083, Peoples R China
[2] Huazhong Univ Sci & Technol, State Key Lab Laser Technol, Wuhan, Peoples R China
来源：
MATERIALS LETTERS | 2006年 / 60卷 / 03期
基金：
中国国家自然科学基金;
关键词：
TiAl based alloy; laser processing; heat treatment; hardness; microstructure;
D O I：
10.1016/j.matlet.2005.09.001
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Laser surface remelting followed by heat treatments at 1000 degrees C for different time was carried out on gamma-TiAl based alloy. The characteristics of structural transformation of laser surface remelted gamma-TiAl based alloy were investigated by high-temperature microscope, TEM and XRD. The results show that the phase transformation (alpha(2) -> gamma) in TiAl alloy occurred at the earlier stage of post-heat treatment, and the dendritic structure transformed firstly at the intergranular, then expanded into the transgranular, finally changed to ultrafine equiaxed grain structure, at the same time, micro-hardness of laser-surface remelted gamma-TiAl based alloy had the corresponding change with the structural trans fori-nation. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码：406 / 409
页数：4
相关论文
共 50 条
  • [21] The Effect of Laser Post-Heat Treatment of Laser Powder Bed Fusion High Nitrogen Steel on the Microstructure and Mechanical Properties
    Fu, Jiazhe
    Liu, Jie
    Zhong, Sheng
    Li, Tiannan
    Zhang, Peng
    Xing, Ying
    Liang, Yanwen
    Guo, Shun
    Wang, Kehong
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025,
  • [22] Phase transitions of hydroxyapatite coatings during post-heat treatment and their performances under ultrasonic tests
    Tong, WD
    Li, XD
    Feng, JM
    Chen, JY
    Zhang, XD
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 2001, 56 (01): : 49 - 55
  • [23] Experimental study on mechanical properties of laser powder bed fused Ti-6Al-4V alloy under post-heat treatment
    Chen, Bingqing
    Wu, Zhengkai
    Yan, Taiqi
    He, Ziang
    Sun, Bingbing
    Guo, Guangping
    Wu, Shengchuan
    ENGINEERING FRACTURE MECHANICS, 2022, 261
  • [24] The effect of heat treatment on crack control and grain refinement in laser beam welded β-solidifying TiAl-based alloy
    Liu, J.
    Dahmen, M.
    Ventzke, V.
    Kashaev, N.
    Poprawe, R.
    INTERMETALLICS, 2013, 40 : 65 - 70
  • [25] The effect of process parameters and heat treatment on the microstructure of direct laser fabricated TiAl alloy samples
    Srivastava, D
    Chang, ITH
    Loretto, MH
    INTERMETALLICS, 2001, 9 (12) : 1003 - 1013
  • [26] Post-heat treatment design for high-strength low-alloy steels processed by laser powder bed fusion
    Sridar, Soumya
    Zhao, Yunhao
    Li, Kun
    Wang, Xin
    Xiong, Wei
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 788
  • [27] The Influence of Heat Treatment and Laser Alternative Surface Treatment Methods of Non-Alloy Steels: Review
    Kapustynskyi, Oleksandr
    Visniakov, Nikolaj
    PHOTONICS, 2025, 12 (03)
  • [28] Microstructural Characterization of a Laser Surface Remelted Cu-Based Shape Memory Alloy
    da Silva, Murillo Romero
    Gargarella, Piter
    Wolf, Witor
    Gustmann, Tobias
    Kiminami, Claudio Shyinti
    Pauly, Simon
    Eckert, Juergen
    Bolfarini, Claudemiro
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2018, 21 (03):
  • [29] Surface chemistry of polyacrylonitrile- and rayon-based activated carbon fibers after post-heat treatment
    Chiang, Yu-Chun
    Lee, Chen-Yueh
    Lee, Hung-Chih
    MATERIALS CHEMISTRY AND PHYSICS, 2007, 101 (01) : 199 - 210
  • [30] Tailoring the mechanical performance of electron beam melting fabricated TC4 alloy via post-heat treatment
    Yan, Xinyu
    Liu, Dan
    Yuan, Chun
    Zhou, Changhao
    Wan, Mingpan
    Huang, Chaowen
    MATERIALS TODAY COMMUNICATIONS, 2024, 41
12345