Dendritic structural transformation of laser surface remelted γ-TiAl based alloy during post-heat treatment

被引：6
|
作者：
Wu, GQ
Luo, GX
Huang, Z
Ruan, ZJ
机构：
[1] Beijing Univ Aeronaut & Astronaut, Sch Mat Sci & Engn, Beijing 100083, Peoples R China
[2] Huazhong Univ Sci & Technol, State Key Lab Laser Technol, Wuhan, Peoples R China
来源：
MATERIALS LETTERS | 2006年 / 60卷 / 03期
基金：
中国国家自然科学基金;
关键词：
TiAl based alloy; laser processing; heat treatment; hardness; microstructure;
D O I：
10.1016/j.matlet.2005.09.001
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Laser surface remelting followed by heat treatments at 1000 degrees C for different time was carried out on gamma-TiAl based alloy. The characteristics of structural transformation of laser surface remelted gamma-TiAl based alloy were investigated by high-temperature microscope, TEM and XRD. The results show that the phase transformation (alpha(2) -> gamma) in TiAl alloy occurred at the earlier stage of post-heat treatment, and the dendritic structure transformed firstly at the intergranular, then expanded into the transgranular, finally changed to ultrafine equiaxed grain structure, at the same time, micro-hardness of laser-surface remelted gamma-TiAl based alloy had the corresponding change with the structural trans fori-nation. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码：406 / 409
页数：4
相关论文
共 50 条
  • [1] Weldability and microstructure of laser-surface-remelted TiAl intermetallic alloy
    Wu, GQ
    Huang, Z
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 345 (1-2): : 286 - 292
  • [2] Quantitative analysis on microstructure characteristic of pre-strained β-solidified TiAl alloy during post-heat treatment
    Qiang, Fengming
    Wu, Xinyu
    Yu, Yonghao
    Cai, Meina
    Wang, Wen
    Li, Lulu
    Liu, Yi
    Cai, Jun
    Kou, Hongchao
    Wang, Kuaishe
    VACUUM, 2024, 230
  • [3] New heat treatment processing for TiAl based alloy
    He, YH
    Huang, BY
    Liu, Y
    Liu, YX
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 1996, 6 (03) : 96 - 102
  • [4] A NEW HEAT TREATMENT PROCESSING FOR TiAl BASED ALLOY
    He Yuehui
    Huang Baiyun
    Liu Yong
    Liu Yexiang(Research Institute ofpowder Metallurgy Central South University of Technology
    Transactions of Nonferrous Metals Society of China, 1996, (03) : 96 - 102
  • [5] Achieving high strength in a laser powder bed fused FeCoNiAlTaB alloy through post-heat treatment
    Sun, Qinyao
    Du, Dafan
    Dong, Anping
    Li, Zhongjie
    Xiong, Lianghua
    Zhang, Cheng
    Sun, Baode
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 908
  • [6] The Simulation of Post-Heat Treatment in Selective Laser Melting Additive Manufacturing
    Li, J. Y.
    Yao, X. X.
    Wang, Y. F.
    Gao, X.
    Zhang, Z.
    INTEGRATING MATERIALS AND MANUFACTURING INNOVATION, 2021, 10 (03) : 413 - 428
  • [7] Heat treatment of laser metal deposited TiAl TNM alloy
    Rittinghaus, Silja-Katharina
    Hecht, Ulrike
    Werner, Valerie
    Weisheit, Andreas
    INTERMETALLICS, 2018, 95 : 94 - 101
  • [8] EFFECT OF POST-HEAT TREATMENT ON THE WEAR PROPERTIES OF AlSi10Mg ALLOY MANUFACTURED BY SELECTIVE LASER MELTING
    Park, Tae-Hyun
    Baek, Min-Seok
    Sohn, Yongho
    Lee, Kee-Ahn
    ARCHIVES OF METALLURGY AND MATERIALS, 2020, 65 (03) : 1073 - 1080
  • [9] Microstructural evolution of a forged TiAl based alloy during heat treatment at subtransus temperature
    唐建成
    黄伯云
    刘文胜
    贺跃辉
    TransactionsofNonferrousMetalsSocietyofChina, 2000, (02) : 183 - 186
  • [10] The effect of silicon on the near-surface microstructural evolution during high temperature heat treatment of a TiAl based alloy
    Prasad, U
    Xu, Q
    Chaturvedi, MC
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 297 (1-2): : 1 - 9
12345