Shear Flat Jack Test for Evaluating Shear Characteristics on Unreinforced Masonry Structures

被引:4
作者
Viale, Nicola [1 ]
Ventura, Giulio [1 ]
机构
[1] Politecn Torino, Dept Struct Geotech & Bldg Engn, Corso Duca Abruzzi 24, I-10129 Turin, Italy
关键词
Flat jack; masonry; MDT; shear characteristics; shear strength; tensile strength; unreinforced masonry; STRENGTH; WALLS;
D O I
10.1080/15583058.2020.1734687
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The shear properties of unreinforced masonry are key parameters used in order to understand the behaviour of these structures under horizontal actions. These characteristics are usually determined using Destructive Testing (DT) methods. However, this typology of tests is not always suitable due to both their high impact and cost. The present work aims to design, analyze and apply an innovative Minor Destructive Testing (MDT) technique for the determination of the shear mechanical properties. To limit the impact on the structure, the Flat Jack (FJ) technique was adopted. The geometrical configuration, chosen among six different layouts, was studied in order to comprehend the role-played by different parameters and to have then a mathematical model representative of the stresses inside of the sample. Finally, four in situ tests were executed and are analyzed and discussed.
引用
收藏
页码:1857 / 1885
页数:29
相关论文
共 50 条
  • [31] GRADUAL DAMAGE ANALYSIS FOR UNREINFORCED MASONRY WALL UNDER SHEAR-COMPRESSION LOADS
    Liu, Hong-Jun
    Lin, Kun
    [J]. PROCEEDINGS OF THE ELEVENTH INTERNATIONAL SYMPOSIUM ON STRUCTURAL ENGINEERING, VOL I AND II, 2010, : 605 - 610
  • [32] Diagonal shear behaviour of unreinforced masonry wallettes strengthened using twisted steel bars
    Ismail, Najif
    Petersen, Robert B.
    Masia, Mark J.
    Ingham, Jason M.
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2011, 25 (12) : 4386 - 4393
  • [33] Accuracy of stochastic finite element analyses for the safety assessment of unreinforced masonry shear walls
    Gooch, Lewis J.
    Stewart, Mark G.
    Masia, Mark J.
    [J]. CIVIL ENGINEERING AND ENVIRONMENTAL SYSTEMS, 2024,
  • [34] The use of the diagonal compression test to identify the shear mechanical parameters of masonry
    Calderini, Chiara
    Cattari, Serena
    Lagomarsino, Sergio
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2010, 24 (05) : 677 - 685
  • [35] Shear test method analysis of earth block masonry mortar joints
    Lan, Guanqi
    Wang, Yihong
    Xin, Li
    Liu, Yuan
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2020, 264
  • [36] Masonry walls under shear test: A CM modeling
    Ferretti, E.
    Casadio, E.
    Di Leo, A.
    [J]. CMES - Computer Modeling in Engineering and Sciences, 2008, 30 (03): : 163 - 189
  • [37] Experimental investigation of size effect on unreinforced concrete brick masonry walls under in-plane shear loading
    Lim, Woo-Young
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2024, 428
  • [38] Numerical analysis of triplet shear test on brickwork masonry
    Wang, Junzhe
    Heath, Andrew
    Walker, Pete
    [J]. ADVANCES IN CIVIL ENGINEERING AND BUILDING MATERIALS III, 2014, 831 : 437 - 441
  • [39] Masonry walls under shear test: a CM modeling
    Ferretti, E.
    Casadio, E.
    Di Leo, A.
    [J]. CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, 2008, 30 (03): : 163 - 189
  • [40] Evaluating the Shear Resistance of Hot Mix Asphalt by the Direct Shear Test
    Wang, Hai-nian
    Liu, Xi-jun
    Hao, Pei-wen
    [J]. JOURNAL OF TESTING AND EVALUATION, 2008, 36 (06) : 485 - 491