Investigation of Cutting Model in Machining of Al/SiCp Metal Matrix Composite

被引：1
|
作者：
Nikouei, S. M. [1 ]
Kouchakzadeh, M. A. [1 ]
Yousefi, R. [1 ]
Kadivar, M. A. [2 ]
机构：
[1] Sharif Univ Technol, Tehran, Iran
[2] Ind & Mines Univ, Tehran, Iran
来源：
MATERIALS AND COMPUTATIONAL MECHANICS, PTS 1-3 | 2012年 / 117-119卷
关键词：
MMCp; Chip formation; Shear plane angle; Merchant theory; Lee and Shaffer theory; TOOL WEAR; REINFORCED ALUMINUM;
D O I：
10.4028/www.scientific.net/AMM.117-119.1465
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Prediction of shear plane angle is a way for prediction of the mechanism of chip formation, machining forces and so on. In this study, Merchant and Lee-Shaffer theories are used to predict the shear plane angles and cutting forces in machining of Al/SiCp MMC. The experimental cutting forces are compared with the calculated cutting force based on shear plane angles extracted from Merchant and Lee-Shaffer theories. The variation of these cutting forces with cutting speed, feed rate and depth of cut has been discussed. The results show that Merchant theory may be used as a good method for prediction of chip formation in machining of Al/SiCp MMC.
引用
收藏
页码：1465 / +
页数：2
相关论文
共 50 条
  • [1] An experimental investigation into the machining of SiCp/Mg metal matrix composite
    Pedersen, WE
    Ramulu, M
    TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME, VOL XXIX, 2001, 2001, : 183 - 188
  • [2] Development, Characterization and Machining of Al and SiCp Nano Particles Metal Matrix Nano Composite
    Swain, Pradyut Kumar
    Sahool, Ashok Kumar
    Das, Ratnakar
    Padhi, Payodhar
    INTERNATIONAL CONFERENCE ON ENGINEERING AND TECHNOLOGY (INTCET 2017), 2018, 1930
  • [3] An investigation of cutting force and tool-work interface temperature in milling of Al-SiCp metal matrix composite
    Jayakumar, K.
    Mathew, Jose
    Joseph, M. A.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2013, 227 (B3) : 362 - 374
  • [4] Modeling and Optimization of Electric Discharge Machining Process Parameters in machining of Al 6061/SiCp Metal Matrix Composite
    Srivastava, Anjani
    Yadav, Sunil Kumar
    Singh, D. K.
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 1169 - 1174
  • [5] INVESTIGATION ON THERMAL PROPERTIES OF Al/SiCp METAL MATRIX COMPOSITE BASED ON FEM ANALYSIS
    Yu, Eusun
    Sun, Jeong-Yun
    Chung, Hee-Suk
    OH, Kyu Hwan
    ENGINEERING PLASTICITY AND ITS APPLICATIONS: FROM NANOSCALE TO MACROSCALE, 2009, : 795 - 800
  • [6] INVESTIGATION ON THERMAL PROPERTIES OF Al/SiCP METAL MATRIX COMPOSITE BASED ON FEM ANALYSIS
    Yu, Eusun
    Sun, Jeong-Yun
    Chung, Hee-Suk
    Oh, Kyu Hwan
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2008, 22 (31-32): : 6167 - 6172
  • [7] Investigation on the cutting mechanism of SiCp/Al composites in ultrasonic elliptical vibration machining
    Chen, Wenxiang
    Zhang, Xu
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 120 (7-8): : 4707 - 4722
  • [8] Investigation on cutting mechanisms of machining SiCp/Al based on strain gradient theory
    Fan, Yihang
    Chu, Xingxu
    Hao, Zhaopeng
    Lin, Jieqiong
    JOURNAL OF MANUFACTURING PROCESSES, 2024, 120 : 305 - 316
  • [9] Investigation on the cutting mechanism of SiCp/Al composites in ultrasonic elliptical vibration machining
    Wenxiang Chen
    Xu Zhang
    The International Journal of Advanced Manufacturing Technology, 2022, 120 : 4707 - 4722
  • [10] Corrosion protection of an Al 6092/SiCp metal matrix composite
    Chen, C
    Mansfeld, F
    CORROSION SCIENCE, 1997, 39 (06) : 1075 - 1082
12345