Feed Cutting Force Component in Up and Down Sawing of Pine

被引：1
作者：
Javorek, Lubomir [1 ]
Kminiak, Richard [2 ]
Vargovska, Maria [1 ]
Csanady, Etele [3 ]
Nemeth, Szabolcs [3 ]
机构：
[1] Tech Univ Zvolen, Fac Technol, Dept Mfg & Automat Technol, Zvolen, Slovakia
[2] Tech Univ Zvolen, Fac Wood Technol, Dept Woodworking, Zvolen, Slovakia
[3] Univ Sopron, Fac Wood Engn & Creat Ind, Inst Wood Ind & Technol, Sopron, Hungary
来源：
DRVNA INDUSTRIJA | 2022年 / 73卷 / 03期
关键词：
pine wood; sawing; feed speed; rake angle; teeth number; feed force; POWER REQUIREMENTS; WOOD;
D O I：
10.5552/drvind.2022.0018
中图分类号：
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号：
0805 ; 080502 ; 0822 ;
摘要：
The monitoring of cutting force components is one of the possibilities to control machining processes from the point of view of its stability, machine tool spindle or cutting tool loading. This paper presents and compares the results of experimental longitudinal sawing of pine wood with 4 saw discs with different teeth number (16 and 24) and rake angle (10 degrees and 20 degrees) during up (conventional) and down (climb) cutting with different revolutions (4000 min(-1), 5000 min(-1), 6000 min(-1)) and feed speed (15 m/min, 20 m/min, 25 m/min). The signal was obtained from Quart 3-components piezoelectric dynamometer.
引用
收藏
页码：279 / 288
页数：10
相关论文
共 26 条
  • [1] Machining qualification of solid wood of Fagus silvatica L. and Picea excelsa L.:: Cutting forces, power requirements and surface roughness
    Aguilera, A
    Martin, P
    [J]. HOLZ ALS ROH-UND WERKSTOFF, 2001, 59 (06) : 483 - 488
  • [2] Aguilera A, 2011, EUR J WOOD WOOD PROD, V69, P489, DOI 10.1007/s00107-010-0481-3
  • [3] Aguilera A, 2011, EUR J WOOD WOOD PROD, V69, P11, DOI 10.1007/s00107-009-0396-z
  • [4] [Anonymous], RANC 207 AMW TECHNIC
  • [5] [Anonymous], 2017, 847 1
  • [6] Beer P, 2002, ROCZNIKI AKADEMII RO
  • [7] Dange A. R., 2011, International Journal of Agricultural Technology, V7, P1485
  • [8] Reducing the Energy Consumption of Circular Saws in the Cutting Process of Plywood
    Fekiac, Jozef
    Svoren, Jan
    Gaborik, Jozef
    Nemec, Miroslav
    [J]. COATINGS, 2022, 12 (01)
  • [9] Fischer R., 1979, HOLZTECHNOLOGIE, V20, P111
  • [10] CUTTING TEST AS A SOURCE OF FRACTURE TOUGHNESS AND SHEAR YIELD STRENGTH FOR AXIAL-PERPENDICULAR MODEL OF WOOD CUTTING
    Hlaskova, Lud'ka
    Kopecky, Zdenek
    Solar, Ales
    Patocka, Zdenek
    [J]. WOOD AND FIBER SCIENCE, 2019, 51 (01): : 58 - 68
123